Applied Motion Systems STR-2M Stepper Motor Controller 0.3 → 2.2 A, 92.6 x 56 x 20.8mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

STR - Stepper Drive

STR - High Performance Stepper Drive.
Easy Drive Configuration, on-board DIP switches are used to configure running current, idle current, load inertia ratio and step resolution.


STR Stepper Drive
Dual H-bridge, 4 quadrant
4 state PWM at 16 kHz
Switch Selectable Parameters
Anti-Resonance
Microstepping
Microstep Emulation
Self Test
Simple Setup, no software required

Specifications
Attribute Value
For Motor Type Bipolar
Current Rating 0.3 → 2.2 A
Voltage Rating 12 → 48 V dc
Overall Length 92.6mm
Overall Width 56mm
Overall Depth 20.8mm
12 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,031.96
units
Per unit
1 +
MYR1,031.96
Related Products
The PCU D10 display and control panel connects ...
Description:
The PCU D10 display and control panel connects by two wires to the APM110E as a remote display repeater and programming module. Supply voltage 10 Vdc from APM110EAnalogue output 4-20mA16 LEDs for indicate the unitIP54 protectionPanelmountingCut out 68x68 mmFor use ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadratureAnalogue velocity (oscillator) modeHost commands (SCL compatible)SiNet hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
Drives motors up to 40V at 3.5AAdjustable drive ...
Description:
Drives motors up to 40V at 3.5AAdjustable drive current settings from 0.5 to 3.5AOutput overload protectionSynchronisation output for multi-axis systemsFull and half step drive modesTTL & CMOS compatible control interfaceOutput disable input5 & 12Vdc auxiliary outputs for external device energisationStatus ...
Drives motors up to 85V and 6A/phaseOn board ...
Description:
Drives motors up to 85V and 6A/phaseOn board output drive current setting (2.5 to 6.0A)High efficiency chopped constant current power stage provides increased performance and reduced current consumptionSingle supply rail simplifies power supply requirementsShort-circuit and open circuit protected stage for ...