McLennan Servo Supplies PM546 Stepper Motor Controller 6 A, 24 → 85V dc, 228 x 100 x 34mm

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Bipolar Stepper Drive

Drives motors up to 85V and 6A/phase
On board output drive current setting (2.5 to 6.0A)
High efficiency chopped constant current power stage provides increased performance and reduced current consumption
Single supply rail simplifies power supply requirements
Short-circuit and open circuit protected stage for increased reliability
Selectable full or half step phase logic
Over temperature monitor with selectable automatic drive shutdown
Opto-isolated control inputs
Control from external clock and direction signals

Specifications
Attribute Value
For Motor Type Bipolar
Current Rating 6 A
Board Supply Voltage 24 → 85V dc
Overall Length 228mm
Overall Width 100mm
Overall Depth 34mm
Temporarily out of stock - back order for despatch 10/02/2020, delivery within 4 working days from despatch date
Price Each
MYR 2,946.50
units
Per unit
1 +
MYR2,946.50
Related Products
The PCU D10 display and control panel connects ...
Description:
The PCU D10 display and control panel connects by two wires to the APM110E as a remote display repeater and programming module. Supply voltage 10 Vdc from APM110EAnalogue output 4-20mA16 LEDs for indicate the unitIP54 protectionPanelmountingCut out 68x68 mmFor use ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadratureAnalogue velocity (oscillator) modeHost commands (SCL compatible)SiNet hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadratureHost control modeIdle current reductionAnti-resonanceTorque ripple smoothingMicrostep ...
Drives motors up to 40V at 3.5AAdjustable drive ...
Description:
Drives motors up to 40V at 3.5AAdjustable drive current settings from 0.5 to 3.5AOutput overload protectionSynchronisation output for multi-axis systemsFull and half step drive modesTTL & CMOS compatible control interfaceOutput disable input5 & 12Vdc auxiliary outputs for external device energisationStatus ...