Valsteam ADCA 10 bar SG Iron Float & Thermostatic Steam Trap, 1/2 in

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PT
Product Details

Float and Thermostatic Steam Traps

The FLT17LC float and thermostatic (integral air vent) steam traps series are designed for all types of low and high pressure steam heating and process equipment.
Typical applications include unit heaters, heat exchangers, driers, jacketed vessels and all the applications where continuous drainage is essential

Modulating discharge
Discharges condensate at steam temperature
Unaffected by sudden or wide load and pressure changes
Excellent air discharge (by thermostatic air vent)
GJS-400 SG-Iron body construction
AISI-304 Stainless steel internals
C/W inbuilt thermostatic air vent

Note

Connections are female screwed or flanged for horizontal or vertical installation

Specifications
Attribute Value
Trap Type Float & Thermostatic
Connection 1/2 in
Orientation Horizontal, Vertical
Maximum Working Pressure 10 bar
Maximum Temperature +198°C
Body Material SG Iron
Gasket Material Graphite, Stainless Steel
Connection Size 1/2in
Thread Standard or Connection Type BSP
1 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 832.24
units
Per unit
1 +
MYR832.24
Related Products
TD42L designed for relatively small condensate loads and ...
Description:
TD42L designed for relatively small condensate loads and ideal for mains drainage applications. TD42H is ideal for process type loadsScrewed BSP with in-built strainerCompact and lightweight, reducing installation costsPositive discharge with clean tight shut-off. No back-up of condensate ensures maximum ...
All units PN16 with Stainless Steel internal parts ...
Description:
All units PN16 with Stainless Steel internal parts and Reinforced Exfoliated Graphite gaskets, Straight Orientation; Maximum Operating Pressure - 14bar g; Maximum Allowable Pressure - 16 bar g; Maximum Cold Hydraulic Test Pressure - 24bar g; Cover Bolts Material - ...
Compact design reduces installation space requirements in comparison ...
Description:
Compact design reduces installation space requirements in comparison to other types of steam trapHigh resistance to superheat and water-hammer ensures long working life and reduces maintenanceAutomatically discharges air and non-condensing gases to aid rapid warm-up of plantUnaffected by back pressure ...
All units PN16 with Stainless Steel internal parts ...
Description:
All units PN16 with Stainless Steel internal parts and Reinforced Exfoliated Graphite gaskets, Straight Orientation; Maximum Operating Pressure - 14bar g; Maximum Allowable Pressure - 16 bar g; Maximum Cold Hydraulic Test Pressure - 24bar g; Cover Bolts Material - ...