HARWIN 3mm Pitch Spring Test Probe With Concave Tip, 2A

  • RS Stock No. 521-601
  • Mfr. Part No. P1113CA3
  • Manufacturer HARWIN
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TW
Product Details

Spring loaded Test Terminals

Spring-loaded terminal for fast multipoint testing of PCB sub-assemblies during development and production.
Designed to be pressed or epoxy bonded into pre-planned test beds, aligned with the track and pins of the board to be tested.
Stock No. 521-601 has a gold-plated brass concave probe for locating PCB pins and solder joints.
Stock No. 521-611 has a nickel plated carbon-steel pointed probe for making contact to flat track and pads.
Probe is housed in a gold-plated brass body with a gold plated spring steel spring.
Solder posts connection to terminals
Recommended test-bed thickness: 5mm min. (epoxy bonded) 12mm max., (press fit)
15 mm max.

Specifications
Attribute Value
Pitch 3mm
Length 27mm
Body Material Brass
Current Rating 2A
Contact Resistance 50mΩ
Probe Tip Type Concave
665 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 5)
MYR 9.41
units
Per unit
Per Pack*
5 - 70
MYR9.41
MYR47.05
75 - 245
MYR8.884
MYR44.42
250 - 495
MYR8.652
MYR43.26
500 +
MYR8.574
MYR42.87
*price indicative
Related Products
The FLIR MR06 Wall Cavity Probe expands the ...
Description:
The FLIR MR06 Wall Cavity Probe expands the functionality of your FLIR moisture meter by allowing you to easily measure insulation moisture levels within a wall cavity and the inside face of exterior walls. FLIR’s new insulated pins are smaller ...
The MR07 Hammer Probe expands the functionality of ...
Description:
The MR07 Hammer Probe expands the functionality of your FLIR Moisture Meter by allowing you to take measurements in subfloor through carpet, hardwood flooring, and hard materials that are difficult to penetrate with a standard pin probe.
The MR08 Hammer and Wall Cavity Probe Combo ...
Description:
The MR08 Hammer and Wall Cavity Probe Combo is ideal for both hammer probe and wall cavity applications. The hammer probe has an additional handle on the bottom to add convenience for angled, horizontal, and inverted hammer-probing needs. The bottom ...
Micro probe that accepts 0.64mm socket (Stock No. ...
Description:
Micro probe that accepts 0.64mm socket (Stock No. 775-754 for adaptor leads)Tip is spring loaded and suitable for sampling extremely small measuring points and SMD components.