Freewheel/Bearing CSK-PP 25mm

  • RS Stock No. 146-5251
  • Mfr. Part No. CSK 25-PP
  • Manufacturer Stieber
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Types CSK..P and CSK..PP are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals is recommended especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible.

Specifications
Attribute Value
Series 6205
Inside Diameter 25mm
Outside Diameter 52mm
Race Width 15mm
Torque 85Nm
Over-running Speed 5200rpm
Dynamic Load Rating 10.7kN
Static Load Rating 5.46kN
Keyway Inner and Outer Race
Drag Torque 2Ncm
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 560.90
units
Per unit
1 - 4
MYR560.90
5 +
MYR538.41
Related Products
Shielded bearings are fitted with two metal dust ...
Description:
Shielded bearings are fitted with two metal dust shields to prevent ingress of dirt and foreign matter. Primarily intended for applications where the bearing inner ring rotatesIf the outer ring rotates there is a danger that grease may be lost ...
FAG from Schaeffler axial deep groove ball bearings ...
Description:
FAG from Schaeffler axial deep groove ball bearings comprise of shaft locating washers, housing locating washers and ball and cage assemblies. The bearings are not self-retaining; the ball and cage assembly and bearing washers can therefore be fitted independently of ...
INA from Schaeffler angular contact ball bearings have ...
Description:
INA from Schaeffler angular contact ball bearings have a double row design and lip seals on both sides. • Lower operating costs • Reduced maintenance due to improved lubrication • Lower heat generation • Less noise • Sealed.
Thrust bearings suitable for unidirectional axial loads, supplied ...
Description:
Thrust bearings suitable for unidirectional axial loads, supplied as three-part assemblies comprising of two grooved outer raceways and a caged ball set. These bearings are not suitable for radial loads.,Typical applications include vertical shaft bearings, steering columns etc.