Burkert Solenoid Valve 93970174, NC, 230 V ac, 1/2in

  • RS Stock No. 816-3364
  • Mfr. Part No. 93970174
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

DS6281-EV 2/2 Solenoid Valve - Brass Bodied - ATEX

A 2 way servo assisted solenoid valves suitable for use with neutral fluids such as compressed air and water. N/C (Normally Closed) and N/O (Normally Open) versions available with NBR (Nitrile Rubber) or FKM (Fluroelastomer) seals. Usable for a variety of applications including heating and refrigeration, water treatment, compressed air and vacuum systems.

0.1 - 4 second response time (dependant upon pressure)
IP65 Rated (with cable protection)
Brass body
Quiet operation
Water hammer free design
Compact installation length
NPT / Rc connection ports
0.2 - 16 Bar pressure range
ATEX approved

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Connection 1/2 in G
Connection Size 1/2in
Default Valve Position NC
Type 2/2
Orifice Diameter 13mm
Body Material Brass
Maximum Working Pressure 16 bar
Operating Temperature Range -10 +80 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +80°C
Thread Standard or Connection Type G
Hazardous Area Certification ATEX
Connection Gender Female
Flow Factor Kv 3.8m³/h
Series 6281 EV Standard
4 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,076.41
units
Per unit
1 +
MYR1,076.41
Related Products
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid mediaSuitable for vacuumFor systems with low or fluctuating pressure conditionsDefined flow directionValve works without minimum pressure differentialElectromagnetically actuatedWith forced liftClosing dampingWithout tool, interchangeable magnet (Click-on®).
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. CompressorsWater dispensing & purificationCooling systemsMedical ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves ...
For neutral gaseous and liquid fluidsHigh flow capabilityFor ...
Description:
For neutral gaseous and liquid fluidsHigh flow capabilityFor robust applicationsDamped closingSuitable for vacuumsValve operates without minimum pressure differentialMagnet can be replaced without tools (Click-on®).