Burkert Solenoid Valve 93970147, 2 port , NC, 230 V ac, 3/4in

  • RS Stock No. 816-3279
  • Mfr. Part No. 93970147
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

DS6281-EV 2/2 Solenoid Valve - Stainless Steel

A 2 way servo assisted solenoid valves suitable for use with neutral fluids such as compressed air and water. N/C (Normally Closed) and N/O (Normally Open) versions available with NBR (Nitrile Rubber) or FKM (Fluroelastomer) seals. Usable for a variety of applications including heating and refrigeration, water treatment, compressed air and vacuum systems
ATEX approved versions available.

0.1 - 4 second response time (dependant upon pressure)
IP65 Rated (with cable protection)
Stainless steel body
Quiet operation
Water hammer free design
Compact installation length
NPT / Rc connection ports
0.2 - 16 Bar pressure range

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Pilot
Connection 3/4 in G
Connection Size 3/4in
Default Valve Position NC
Suitable Applications Hot Air, Pre-Solution
Type 2/2
Orifice Diameter 20mm
Body Material Stainless Steel
Maximum Working Pressure 16 bar
Operating Temperature Range 0 → +120 °C
Minimum Operating Temperature 0°C
Maximum Operating Temperature +120°C
Thread Standard or Connection Type G
Series 6281 EV Standard
Maximum Closing Time 0.1 → 4s
Connection Gender Female
Servo Assist Yes
Flow Factor Kv 8.5m³/h
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,503.10
units
Per unit
1 +
MYR1,503.10
Related Products
Two-way pilot operated solenoid valves with zero bar ...
Description:
Two-way pilot operated solenoid valves with zero bar minimum operating pressure, normally open with threaded port connection. Brass bodyPressure not required for operationCompact & lightweightDIN plug connectionCan be mounted in any position.
Two-way, brass-bodied WRAS listed solenoid valves with anti-water ...
Description:
Two-way, brass-bodied WRAS listed solenoid valves with anti-water hammer devices fitted as standard. They have a zero bar minimum operating pressure and are normally closed. The compact, lightweight unit may be mounted in any position (however, for optimum life, certain ...
Two-way, pilot operated solenoid valves, minimum operating pressure ...
Description:
Two-way, pilot operated solenoid valves, minimum operating pressure required, normally closed with threaded port connection. Brass bodyMinimum operating pressure requiredCompact & lightweightDIN plug connection Ranging from -20 to +85°CCan be mounted in any position.
Two-way, direct operated, EN161 approved solenoid valves for ...
Description:
Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection. Pressure not required for operationCompact & lightweightISO 4400 DIN connectionClass A, group 2 service ...