Asco Solenoid Valve SCG356B466VMS.24/DC, 3 port , NC, 24 V dc, 1/4in

  • RS Stock No. 684-3806
  • Mfr. Part No. SCG356B466VMS.24/DC
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Direct control 3//2 solenoid valves, series 356

3//2 NC direct control solenoid valves.
Compact and lightweight for easy installation.
No minimum control pressure.
Standard manual control.
Brass body.
Pluggable connectors.
Mounted via 2 tapped holes on lower section.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 3
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 3/2
Orifice Diameter 1.6mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +100 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +100°C
Maximum Opening Time 10ms
Thread Standard or Connection Type G
Flow Factor Kv 0.08m³/h
Maximum Closing Time 10ms
Series 356
Connection Gender Female
13 Within 4 working day(s) (Global stock)
12 Within 4 working day(s) (Global stock)
Price Each
MYR 354.89
units
Per unit
1 +
MYR354.89
Related Products
Solenoid valves with pivoted armatures which provide high ...
Description:
Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids. BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in 90° incrementsZero head pressure capabilityLockable manual ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
The direct-acting 3/2-way, normally closed type 6014Ex solenoid ...
Description:
The direct-acting 3/2-way, normally closed type 6014Ex solenoid valve is suitable for use with neutral and aggressive gases and fluids, for example: compressed air, town and natural gas, water, and hydraulic oil, in filling, dosing, and batching applications. The solenoid ...
Control valve for valves actuated by external fluidsSuitable ...
Description:
Control valve for valves actuated by external fluidsSuitable for Series 84720 (RS stock no. 529-5130) and 84740 (RS stock no. 529-5168)3 / 2-wayFor neutral gaseous and liquid fluidsComplete with connection nuts and sealVentilation, noise insulatedLow energy consumptionCompact designMagnet can be ...