Burkert Solenoid Valve 134122, 2 port , NC, 230 V ac

  • RS Stock No. 307-0276
  • Mfr. Part No. 134122
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

6011 Series Two-way, Miniature Normally Closed Solenoid Valves - Sub Base Connection (Manifold)

Compact Design
Coil changed easily with valve in place
FPM seal
Suitable for the following media: compressed air, water, hydraulic oil
Operating temperature -10 to +100°C max.
Protection to IP65 with cable plug DIN43650C
Fits on the following manifolds: stock nos 244-389, 244-395, 244-418 and 244-424

//media.rs-online.com/t_line/L313197-01.gif
//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Direct
Default Valve Position NC
Suitable Applications Liquid, Neutral Gas, Technical Vacuum
Type 2/2
Orifice Diameter 1.6mm
Body Material Brass
Maximum Working Pressure 12 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Series 6011
Flow Factor Kv 0.06m³/h
Maximum Closing Time 15ms
Maximum Opening Time 10ms
1 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 208.71
units
Per unit
1 - 4
MYR208.71
5 - 9
MYR194.24
10 - 24
MYR190.06
25 +
MYR183.68
Related Products
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Three-way solenoid valves with zero bar minimum operating ...
Description:
Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection. Brass bodyPressure not required for operationCompact & lightweightDIN plug connection Ranging from -10°C to +100°CCan be mounted in any position.
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. CompressorsWater dispensing & purificationCooling systemsMedical ...
Manifold type mounting valveMedium is only in contact ...
Description:
Manifold type mounting valveMedium is only in contact with the valve internals and bodyHigh quality seal material FPM (Viton) standardCoil can be changed easily with valve in placeCoil can be locked in 4 x 90° positions or move freely between, ...