Burkert Solenoid Valve 125302, 2 port , NC, 24 V ac, 1/4in

  • RS Stock No. 306-9951
  • Mfr. Part No. 125302
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

2 // 2 NF direct control, compact solenoid valves, series 6013

Range of direct control 2 // 2 NC solenoid valves for neutral liquids up to +100°C.
Able to change the solenoid without removing the valve.
The solenoid can be positioned freely or locked in 4 positions at 90° intervals.
High quality, FPM sealing material included as standard.
DIN 43 650A connector.
Brass body.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V ac
Number of Ports 2
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Liquid, Neutral Gas
Type 2/2
Orifice Diameter 3mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Maximum Opening Time 20ms
Series 6013
Flow Factor Kv 0.23m³/h
Maximum Closing Time 30ms
Connection Gender Female
Thread Standard or Connection Type G
9 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 372.24
units
Per unit
1 +
MYR372.24
Related Products
Solenoid valves with pivoted armatures which provide high ...
Description:
Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids. BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in 90° incrementsZero head pressure capabilityLockable manual ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Three-way solenoid valves with zero bar minimum operating ...
Description:
Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection. Brass bodyPressure not required for operationCompact & lightweightDIN plug connection Ranging from -10°C to +100°CCan be mounted in any position.
Two-way, direct operated, EN161 approved solenoid valves for ...
Description:
Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection. Pressure not required for operationCompact & lightweightISO 4400 DIN connectionClass A, group 2 service ...