Burkert Solenoid Valve 424107, 3 port , NC, 230 V ac, 1/4in

  • RS Stock No. 468-201
  • Mfr. Part No. 424107
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

6014 General Purpose Solenoid Valve

Brass bodied, normally closed solenoid valves.

Coil changed easily with valve in place
Two female ports and a 1/8 in. male vent port
Coil can be locked in four by 90° positions or move free between, as required
Brass body and FKM high quality seal material
Epoxy encapsulated coil
Fluid temperature range: -10 to +90°C
Suitable for use with water, neutral fluids air natural, gases, oil and fats (without additives)
Maximum viscosity: 21mm2/s
Operating temperature: –10 to +100°C max.
Power consumption: 21VA (a.c. in rush), 12VA/8W (constant) 8W (d.c.)
Protection to IP65 with cable plug DIN43650C

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 3
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Compressed Air, Liquid, Neutral Gas
Type 3/2
Orifice Diameter 2mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Maximum Opening Time 18ms
Connection Gender Female
Thread Standard or Connection Type G
Maximum Closing Time 22ms
Flow Factor Kv 0.11m³/h
Series 6014P
11 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 521.81
units
Per unit
1 - 5
MYR521.81
6 +
MYR506.45
Related Products
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Isolating diaphragm in FFKM - medium only in ...
Description:
Isolating diaphragm in FFKM - medium only in contact with body and diaphragmFor medical, laboratory and scientific applications - incl. analysis, distribution, dosing, mixing, filling and batchingMiniature designLow dead volumeDirect acting 2-way normally closed and 3-way universal functionsFor use with ...
Control valve for valves actuated by external fluidsSuitable ...
Description:
Control valve for valves actuated by external fluidsSuitable for Series 84720 (RS stock no. 529-5130) and 84740 (RS stock no. 529-5168)3 / 2-wayFor neutral gaseous and liquid fluidsComplete with connection nuts and sealVentilation, noise insulatedLow energy consumptionCompact designMagnet can be ...