Burkert Solenoid Valve 425285, 3 port , NC, 24 V dc, 1/4in

  • RS Stock No. 468-116
  • Mfr. Part No. 425285
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

6012 Series 3//2 way, Miniature Normally Closed Solenoid Valves – Threaded Port Connection

Coil changed easily with valve in place
Coil can be locked in any one of four 90° positions or move free between, as required
Brass body, polyamide coil and FKM high quality seal material
Suitable for compressed air, water, hydraulic oil
Operating temperature –10 to +100°C max.
Power consumption 4W DC; 9VA (Inrush); 6VA (Hold)
Protection to IP65 with cable plug DIN43650C

//media.rs-online.com/t_line/L313201-01.gif

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 3
Operation Direct
Connection 1/4 in G Male
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Gas, Liquid
Type 3/2
Orifice Diameter 1.2mm
Body Material Polyamide
Maximum Working Pressure 10 bar
Operating Temperature Range Maximum of +55 °C
Maximum Operating Temperature +55°C
Maximum Closing Time 12ms
Maximum Opening Time 12ms
Connection Gender Male
Thread Standard or Connection Type G
Series 6012P
8 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 306.71
units
Per unit
1 - 5
MYR306.71
6 - 11
MYR297.04
12 +
MYR294.55
Related Products
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Range of solenoid valves 3 // 2 NF ...
Description:
Range of solenoid valves 3 // 2 NF DL output, with exhaust when off, for neutral liquids up to +100 °C.Mounting on simple or multi-track bases.Able to change the solenoid without removing the valve.High quality FPM (Viton) sealing material as ...
Solenoid pinch valves; only the tube is in ...
Description:
Solenoid pinch valves; only the tube is in contact with the fluid.One tube is normally closed (N/C) and the other is normally open (N/O).High flow coefficient.For use with flexible silicone hoses or hoses with equivalent elasticity and hardness (50 Shore ...
Control valve for valves actuated by external fluidsSuitable ...
Description:
Control valve for valves actuated by external fluidsSuitable for Series 84720 (RS stock no. 529-5130) and 84740 (RS stock no. 529-5168)3 / 2-wayFor neutral gaseous and liquid fluidsComplete with connection nuts and sealVentilation, noise insulatedLow energy consumptionCompact designMagnet can be ...