Weller WHP 1000 Soldering Station Preheating Plate, 280 x 254 x 70mm for use with Flat Silicon Cells

  • RS Stock No. 667-9264
  • Mfr. Part No. T0053364899
  • Manufacturer Weller
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MX
Product Details

WHP1000 Pre-Heating Plate

Introducing the WHP 1000 pre-heating plate from Weller. A superb device designed to raise the correct working temperature of PCB’s and enable electronic assemblies to be pre-heated prior to repair. Upon inspection, the WHP 1000 offers 4 heating elements each with 250 W of power ideal for use with ceramic and glass boards.

Why is the Pre-Heating Plate important?

Pre-heating plates offer so many benefits such as; components set to the correct working temperature thus ensuring perfect soldering conditions and vastly reduce damage to the PCBs from thermal shock. Ideally, they should be considered as a vital accessory for soldering / de-soldering applications.

Features and Benefits

  • 1000 W/ 230 V

  • Suited for use with silicon cells

  • Ideal for use with ceramic and glass boards

  • Allows board's substrate material to be raised to working temperature without risk of thermal shock

  • 4 X 250 W heating elements

  • Temperature range: 50 °C to 300 °C

  • Digitally controlled

  • Auto Off and Standby Temperature functions

  • Digital temperature display

  • Small benchtop footprint

  • Stainless steel housing

  • ESD safe

  • Can be controlled via the WHA 3000P, WHA 3000V hot air station

  • Easy Cleaning


An integrated RS232 interface enables the device to be controlled externally from the Weller WHA 3000P / WHA 3000V hot air station.
Using an insulated thermocouple Type K the temperature can be monitored in specific locations on the board - RS stock no: 443-7967

Technical Data

  • Dimensions: W.254 x L.280 x H.70 mm

  • Heating plate: 150 x 220 mm

  • Mains voltage: 230 V (120 V); 50 Hz (60 Hz)

  • Power: 1000 W

  • Temperature range: 50°C - 300°C

  • Protection class: 1

Typical Applications

Pre-heating plates are the ideal essential accessory for any Desoldering or Soldering Station application. They are typically used in Electrical & Electronic Servicing and Soldering & De-soldering.

Heating Plates & Solder Baths - Weller

Attribute Value
Model Number WHP 1000
Type Preheating Plate
For Use With Flat Silicon Cells
Suitable Stations Weller WHA3000P or WHA3000V Hot Air Stations
Dimensions 280 x 254 x 70mm
Length 280mm
Width 254mm
Height 70mm
In Global stock for delivery within 4 - 6 working days.
Price Each
MYR 9,544.02
Per unit
1 +
Related Products
Single row weatherproof modular mini-enclosures capable of receiving ...
Single row weatherproof modular mini-enclosures capable of receiving 3 to 12 modules of 18 mm.Enclosure in light grey RAL 7035 and clear green gate.Blanking plates for concealing areas without modular switchgear are available separately.Stainless steel screws.
The Metcal MX-500 Soldering, Desoldering & Rework System ...
The Metcal MX-500 Soldering, Desoldering & Rework System handles both SMT and through-hole soldering/rework with one power supply., Two switchable outputsSMT/De-soldering/Rework station, allowing quick removal and replacing of componentsRequires 60-100psi air supply40W rating at 22°C (72°F) ambientOperating ...
For the de-soldering of small discrete and multi ...
For the de-soldering of small discrete and multi leg dual in line packages. Can be driven from all Weller electronically controlled power units and rework stations. Dual heating elements with 2 independent temperature sensors provide the tips with constant temperatureTips ...
Totally self contained (no external PSU)Can be used ...
Totally self contained (no external PSU)Can be used as a stand alone pre heat solutionLow profile (only 70mm)Rapid heating ceramic platesNon contact safety mashPerfect for lead free reworkHigh & low power settings50°C to 400°C temperature RangeAvailable in 600W or 1200W ...