Steca Solsum 10.10F 10A solar charge controller

  • RS Stock No. 860-2871
  • Mfr. Part No. Solsum 10.10F
  • Manufacturer Steca
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): BG
Product Details

Steca Solsum F

The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers.
The circuit board is completely electronically protected and with the LED user interface it is easy to check the battery state of charge at any time. Large terminals guarantee a simple connection of solar panels, battery and load. The Steca Solsum F works on PWM as a low loss series controller

Voltage regulation
Automatic detection of voltage
PWM control
Multistage charging technology
Current compensated load disconnection
Automatic load reconnection
Temperature compensation
Common positive grounding or negative grounding on one terminal
Monthly maintenance charge

Displays

Multifunction LED display
Multi-coloured LED
4 LEDs show operating states ∼ for operation, state of charge, fault messages

Electronic protection functions

Overcharge protection
Deep discharge protection
Reverse polarity protection of module (≤36 V),load and battery
Automatic electronic fuse
Short circuit protection of load and module
Overvoltage protection at module input
Open circuit protection without battery
Reverse current protection at night
Overtemperature and overload protection
Load disconnection on battery overvoltage

Solar Panels and Chargers

Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries.
Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity.

How Much power?

The daily power production of a solar panel can be calculated by multiplying the panel’s peak power rating by between 0.5 and 6 depending on the time of year, angle and location. For example; an 80Watt solar panel produces a peak current of 4.55A.

Solar Installation

Solar panels are usually installed at a 55-65° angle for optimal wintertime performance. For a year round power supply solar panels can be combined with Wind chargers.
Solar panels can be connected in parallel to increase power and in series to increase voltage.
To complete the system deep cycle batteries, a voltage regulator and electrical cables are required to get up and running. A range of convenient mounting kits are available for pole or wall mounting.

Specifications
Attribute Value
Solar Panel Voltage 12 V, 24 V
Maximum Power Rating for 12 V Panels 240W
Maximum Current Rating for 12 V Panels 10A
Maximum Power Rating for 24 V Panels 240W
Maximum Current Rating for 24 V Panels 10A
Dimensions 145 x 100 x 30mm
Depth 30mm
Length 145mm
Width 100mm
Discontinued product
Related Products
The Infineon ICL5101 integrates a half-bridge controller with ...
Description:
The Infineon ICL5101 integrates a half-bridge controller with a PFC stage in a single package. The integration of high and low side drivers reduces the number of required components and simplifies design, enabling use in small form factor designs. All ...
Tuneable white RF Remote Controller Kit (136-0221)Comprised of ...
Description:
Tuneable white RF Remote Controller Kit (136-0221)Comprised of both the CCT-RF-RCX handheld RF remote control and the CCT-RF-3x5A RF LED Controller, the CCT-RF-KIT from PowerLED offers a unique tuneable white system that can be used in both domestic and commercial ...
The SmartCella is an electronic temperature controller with ...
Description:
The SmartCella is an electronic temperature controller with LED display designed to be used to control single phase cold rooms. It is highly flexible in installation and is suited for applications requiring high load switching power.The temperature controller is designed ...
This plug and play twin solar module system ...
Description:
This plug and play twin solar module system wuth integrated charge controller is delivered inside a portable hard case. It can be connected directly to a battery thanks to its battery cable with clips.This kit brings mobile solar power and ...