Schneider Electric 22 A Soft Starter ATSU01 Series, IP20, 11 kW, 200 → 480 V

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Altistart U01

The Altistart U01 is a soft start/soft stop unit for asynchronous motors. It is designed primarily for combinations with TeSys model U controller-starters.
When combined with a TeSys model U, the Altistart U01 is a power option which provides the “Soft start/soft stop” function. The result is a unique, innovative motor starter.
Using the Altistart U01 starter enhances the starting performance of asynchronous motors by allowing the motor to start gradually, smoothly and in a controlled manner.

Control two phases of the motor power supply to limit the starting current and fordeceleration
Internal Bypass relay
Motor power ratings range from 0.75 kW to 15 kW
Motor supply voltages range from 200 to 480 V, 50//60 Hz

An external 24V power supply is required for controlling the starter.

Schneider Electric TeSys U

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

Faster design with fewer components needed
Quicker panel build with faster assembly time and fewer wires per starter
Space saving 45mm width up to 32A (even for reversing) allowing smaller panels
Flexible and upgradeable with plug-and-play function modules
Voltage and protection parameters can be determined after assembly and wiring
Broad band electronic control unit provides improved overload protection with fewer components
Expandable plug-and–play diagnostics
Total co-ordination for fast return to service after a short circuit fault

Tesys model U is easy to select:

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option

Specifications
Attribute Value
Phase 3
Supply Voltage 200 → 480 V
Current Rating 22 A
Voltage Rating 480 V
Control Voltage 24 V dc
Power Rating 11 kW
IP Rating IP20
Overall Length 113mm
Overall Width 45mm
Overall Depth 154mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +40°C
Series ATSU01
8 Within 4 working day(s) (Global stock)
1 Within 4 working day(s) (Global stock)
Price Each
MYR 1,383.13
units
Per unit
1 +
MYR1,383.13
Related Products
MS3 series electronic soft starters for squirrel cage ...
Description:
MS3 series electronic soft starters for squirrel cage motors are versatile and compact in a robust built housing. Integrated by pass and current measurement you save wiring and external components. The soft starters have five front potentiometers that allow setting ...
Compact and cost-effective smooth start device with integrated ...
Description:
Compact and cost-effective smooth start device with integrated bridging contactor and smooth deceleration function. Limitation of start-up torque and current through 2-phase controlStarting time, deceleration time and starting and end torque can be adjusted separatelyLarge motor voltage range of 200 ...
The PSE softstarter range is the world’s first ...
Description:
The PSE softstarter range is the world’s first compact softstarters with Torque Control. This makes the PSE range an excellent choice for pumping application where water hammering normally is a big problem. With its compact design and advanced functionality, the ...
Compact design - width of 22.5mmOne device for ...
Description:
Compact design - width of 22.5mmOne device for entire control voltage range, from UC 24V to 230VOptimal adjustment capability using only 3 potentiometers, start time, starting voltage & stopping time, all of which can be set individuallyOperating status display (Ready/Run) ...