PR Electronics 3185, Analogue to Voltage Signal Conditioner, Analogue ATEX, 0 → 23 mA Input, 17.5 V dc Output

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DK
Product Details

3100 Type - Loop Powered Isolator

3185 type is a 1 or 2 channel input loop powered isolator. Inputs and outputs are floating and galvanically separated. The converter eliminates ground loops and can be used for measuring floating signals. Also provides surge suppression and protects control systems from transients and noise.

Signal 1:1 functional range 0-23 mA
1-channel version, stock-no. 796-7102
2-channel version, stock-no. 796-7105
Low input voltage drop, typ 1.35 V + Vout
Powered by the analog input current signal loop
The output is voltage limited to 17.5 Vdc
Excellent conversion accuracy, better than 0.1% in the range 0-20.5 mA
High galvanic isolation of 2.5 kVac
Fast response time < 5 ms
Excellent signal/noise ratio > 60 dB
Can be mounted in Safe area or in Zone 2 and Cl. 1 Div 2. area
Slimline 6 mm housing
DIN rail mounting

PR Electronics DIN Rail Mounting

Specifications
Attribute Value
Input Type Analogue
Output Type Voltage
Signal Conditioner Type Analogue to Voltage
Input Range 0 → 23 mA
Output Range 17.5 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Hazardous Area Certification ATEX
Series 3185
Operating Temperature Range -25 → +70 °C
21 Within 4 working day(s) (Global stock)
7 Within 4 working day(s) (Global stock)
Price Each
MYR 583.09
units
Per unit
1 +
MYR583.09
Related Products
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, ...
Description:
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, amplify, filter and electrically isolate standard analogue signals. Clipping capability provides analogue signal limitation to output end values Calibrated scale switching PC configuration interface Safe 3 way isolation with 4 kV test ...
Wago 857 series JUMPFLEX millivolt signal conditioner converts ...
Description:
Wago 857 series JUMPFLEX millivolt signal conditioner converts input millivolt signals into an analogue standard signal on the output side. PC configuration interface Switching between measurement ranges is calibrated Clipping capability allows analogue signal limitation to output end values Safe ...
Wago RTD threshold value switch for RTD sensors, ...
Description:
Wago RTD threshold value switch for RTD sensors, potentiometers and resistors monitors and reports signals of up to two switching thresholds. Providing both digital signal output and relay with normally open contact. Clipping capability provides analogue signal limitation to output ...
5223A Programmable converter has an f/l function that ...
Description:
5223A Programmable converter has an f/l function that performs frequency to current and voltage conversion and an f/f function for pulse division or multiplication. The f/f function also works as a buffer, collecting fast pulse trains. Pulse calculatorFrequency generator (used ...