PR Electronics 4114, Analogue to Current Signal Conditioner, Analogue

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DK
Product Details

4114 Type - Universal Transmitter

4114 Universal Transmitters are for linearizing electronic temperature measurement with RTD or TC sensor. Also for the conversion of linear resistance variation to a standard analog current/voltage signal, i.e. from solenoids and butterfly valves or linear movements with attached potentiometer.
The transmitter are programmable via detachable display front (4501), process calibration, signal simulation, password protection, error diagnostics and selection of help text in several languages.
The 4114 is designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations.

Input for RTD, TC, Ohm, potentiometer, mA and V
Power supply and signal isolator for 2-wire transmitters
Output for current and voltage
Universal AC or DC supply
A green/red front LED indicates normal operation and malfunction
4-port 2.3 kVAC galvanic isolation
FM-approved for installation in Div. 2
DIN Rail mounting
Please order the Display Front separately (stock-no. 796-6890)

PR Electronics DIN Rail Mounting

Specifications
Attribute Value
Input Type Analogue
Output Type Current
Signal Conditioner Type Analogue to Current
Input Range 0 → 12 V dc, 0 → 20 mA, 4 → 20 mA, 10 MΩ, 20 Ω
Output Range 0 → 10 V dc, 0 → 20 mA
Supply Voltage 19.2 → 300 V dc, 21.6 → 253 V ac
Mounting Type DIN Rail
Sensor Compatibility Linear Resistance, Potentiometer, RTD, Thermocouple
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Operating Temperature Range -20 → +60 °C
Series 4114
Number of Channels 1
68 Within 4 working day(s) (Global stock)
162 Within 4 working day(s) (Global stock)
Price Each
MYR 823.17
units
Per unit
1 +
MYR823.17
Related Products
From CLIFF Electronics, this optical receiver jack conforms ...
Description:
From CLIFF Electronics, this optical receiver jack conforms to EIAJ standard CP-1201, and is designed for digital audio interfaces, including fibre-optic connections. Designed for high quality audio applications, the receiver has high speed signal receiving and is virtually unaffected by ...
Electronic circuit protector type ESX10-T is designed to ...
Description:
Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current ...
5106A HART transparent repeater processes current signals of ...
Description:
5106A HART transparent repeater processes current signals of 4…20 mA and is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 1 (136-8689) or 2 (136-8690) channel ...
Description:
6185 type is a 1-, 2- or 4-channel galvanic isolation module. Inputs and outputs are floating and galvanically separated. Elimination of ground loops and measurement of floating signals. Especially useful in applications necessitating an unproblematic transmission of current signals according ...