- RS Stock No.:
- 136-0854
- Mfr. Part No.:
- MIKROE-2458
- Manufacturer:
- MikroElektronika
6 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR380.77
Units | Per Unit |
1 + | MYR380.77 |
- RS Stock No.:
- 136-0854
- Mfr. Part No.:
- MIKROE-2458
- Manufacturer:
- MikroElektronika
Technical data sheets
Legislation and Compliance
Product Details
ECG click mikroBUS™ Bundle
The MikroElektronika ECG Click Board is an accessory board that provides a simple method of adding electrocardiogram measurement hardware to a development platform.
This starter kit variant provides the required electrodes and cables in addition to the ECG Click Board.
Like all Click Boards the ECG Click fits the popular mikroBUS™ socket, creating a plug-in solution to add functionality, removing the need for hardware configuration.
The ECG Click measures electrical activity of the heart through 3 electrodes taped to the skin that connect to the board via a 3.5mm jack. The circuity of the ECG click amplifies the electrical signals from the heart and filters out noise, providing a clean and clear signal for the mother development board.
The MikroElektronika MikroPlot software, a free to download data visualisation tool, can be used to analyse the data generated and create an ECG plot.
This starter kit variant provides the required electrodes and cables in addition to the ECG Click Board.
Like all Click Boards the ECG Click fits the popular mikroBUS™ socket, creating a plug-in solution to add functionality, removing the need for hardware configuration.
The ECG Click measures electrical activity of the heart through 3 electrodes taped to the skin that connect to the board via a 3.5mm jack. The circuity of the ECG click amplifies the electrical signals from the heart and filters out noise, providing a clean and clear signal for the mother development board.
The MikroElektronika MikroPlot software, a free to download data visualisation tool, can be used to analyse the data generated and create an ECG plot.
Features
Fits the popular mikroBUS™ socket
7-block design (protection, preamplifier, high-pass filter #1, amplifier, high-pass filter #2, low-pass filter, DRL circuit)
Jumpers for setting output voltage range
Trimmer potentiometer to adjust gain
MCP609 Op Amp
MAX6106 Voltage Reference IC
ESD, Overvoltage and Overcurrent protection
Analogue output (mikroBUS™ AN pin)
5 V power supply
7-block design (protection, preamplifier, high-pass filter #1, amplifier, high-pass filter #2, low-pass filter, DRL circuit)
Jumpers for setting output voltage range
Trimmer potentiometer to adjust gain
MCP609 Op Amp
MAX6106 Voltage Reference IC
ESD, Overvoltage and Overcurrent protection
Analogue output (mikroBUS™ AN pin)
5 V power supply
Package Contents
1 x ECG Click Board
1 x 3 Lead ECG Cable with 3.5mm Jack
30 x Single Use ECG Electrodes
1 x 3 Lead ECG Cable with 3.5mm Jack
30 x Single Use ECG Electrodes
Note
The ECG Click Board is available as a separate item, MikroElektronika part MIKROE-2455.
The target board requires an MCU with a minimum 10-bit ADC.
Click board comes with the header strips soldered.
The target board requires an MCU with a minimum 10-bit ADC.
Click board comes with the header strips soldered.
Click mikroBUS™ Biomedical Boards
Specifications
Attribute | Value |
---|---|
Sensor Technology | Heart Rate Sensor |
Kit Classification | mikroBus Click Board |
Kit Name | ECG click bundle |