Hirose DX Series, Male 50 Pin Straight Through Hole SCSI Connector 1.27mm Pitch, Plug In, Quick Latch

  • RS Stock No. 162-5709
  • Mfr. Part No. DX20-50S(50)
  • Manufacturer Hirose
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Hirose original 1.27mm pitch High-Density I/O connectors

1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available

Specifications
Attribute Value
Gender Female
Number of Contacts 50
Body Orientation Straight
Mounting Type Through Hole
Contact Material Copper Alloy
Contact Plating Gold
Housing Material PBT
Pitch 1.27mm
Current Rating 500mA
Voltage Rating 300 V
Latch Type Quick Latch
Termination Method Plug In
Series DX
Length 52.45mm
Width 10.5mm
Minimum Operating Temperature -55°C
Maximum Operating Temperature +85°C
Depth 14mm
3 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 47.05
units
Per unit
1 - 4
MYR47.05
5 - 9
MYR42.52
10 +
MYR33.11
Related Products
CompactFlash card header connectors with a 1.27 mm ...
Description:
CompactFlash card header connectors with a 1.27 mm pitch designed for use with industry standard CF (CompactFlash) cards. The CompactFlash card connectors consist of a card guide and holder. The card ejectors can be ordered separately. These CF card connectors ...
All SCSI buses need to be terminated. This ...
Description:
All SCSI buses need to be terminated. This means both ends of the bus get a pull-up resistor construction to eliminate signal reflections that would occur from the physical ends of the bus. This range of SCSI-2 terminators allow a ...
The AMPLIMITE .050 series III shielded D-sub cable ...
Description:
The AMPLIMITE .050 series III shielded D-sub cable plugs with a compact design, high density D type interface and a 1.27 x 2.54 mm centreline. These AMPLIMITE .050 series III d-subminiature connectors have a steel shell with a tin nickel ...