Eaton Safety Relay Dual Channel With 3 Safety Contacts Compatible With Emergency Stop, Safety Switch/Interlock

  • RS Stock No. 812-8960
  • Mfr. Part No. ESR5-NO-31-24VAC-DC
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

ESR5 Safety Relays

The ESR5 safety relay from Eaton is designed to monitor the signals from safety devices at all times and switch off quickly and reliably in an emergency. Suitable for applications that meet the highest safety requirements in accordance with EN 954-1, EN ISO 13849-1 up to PL e and accordance with IEC 62061 up to SILCL 3.

Standards

UL, cULus, TÜV.

All in one – Safety and control relay combined in a single device

The Eaton ESR5 NO 31 safety relay, with built in dual channel (2 Safety contacts) offers you versatile analysis of potential hazards in your machine moving environment. This model of ESR5 allows you to control all your safety devices such as emergency stops buttons, safety guards, light curtains or two handed controls. In the unlikely event there is a failure or hazard detected, the ESR5 NO 31 will work quickly to switch off the power to the machine.

What are some of the features?

• Internal logic of the safety relay will monitor your entire safety circuit and all connect peripherals such as (emergency stop buttons, safety doors or light curtains) and will run the path for you when in a fault-free state.
• This particular model offers you one or two channel variants so you can implement your safety appliances.
• In the event of a fault, the safety relay will quickly engage its primary function in cutting off power to the affected area/s.
• Detect faults before at the input level using integrated diagnostic devices.

Advantages of the ESR5 NO 31

• Narrow in width allowing you to house more important safety devices to your area where space may be an issue.
• Wide range of features offered with the device, allowing you to stay flexible and able to respond immediately to current or future changes in application requirements. This will save you cost & time in the long term.
• Many safety switching contacts and up to 5 enable and 2 signal current paths
• Approved to TÜV Rheinland, UL/CUL, CSA
• Economic monitoring

Technical safety parameters

• Up to Performance Level PL e to EN ISO 13849-1
• Up to Safety Integrity Level SIL CL 3 to IEC 62061

Specifications
Attribute Value
Number of Channels 2
Function Emergency Stop, Safety Switch/Interlock
Safety Contacts 3
Reset Method Automatic, Manual
Terminal Type Screw
Length 22.5mm
Width 114.5mm
Depth 99mm
11 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,504.74
units
Per unit
1 +
MYR1,504.74
Related Products
The safety relay ReLy EMSS1 is an evaluation ...
Description:
The safety relay ReLy EMSS1 is an evaluation unit for emergency stop pushbuttons and safety switches with volt free contacts.The safety relay must only be used within the limits of the prescribed and specified technical data and operating conditions at ...
The PNOZ X1 series from PILZ is a ...
Description:
The PNOZ X1 series from PILZ is a reliable and affordable safety relay that will give you the confidence to run your safety circuits in a safe manner. • Specially designed for two handed control/operation. The P2HZ series will not ...
Protection of humans and machines in accordance with: ...
Description:
Protection of humans and machines in accordance with: EC Directive on Machines 89/392/EEC, IEC 204, EN 60204, DIN VDE 0113. Machine emergency stop switchesMonitors safety doorsSK 3 (with equivalent switching)Output: 3 N/Os, 1 N/C for AC 380 V1 or 2-channel ...
For use in controls of metal working presses ...
Description:
For use in controls of metal working presses and other processing machines with dangerous lock movements (conforms to EC directive for machines 89/392/EEC, safety regulations for two-hand circuits on ZH 1-456 power-driven metal work presses). IV quality level compliant with ...