Pilz 24 V dc Safety Relay Single or Dual Channel With 3 Safety Contacts and 1 Auxilary Contact

  • RS Stock No. 239-1083
  • Mfr. Part No. 774340
  • Manufacturer Pilz
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

PILZ P2HZ X1, Two Hand Monitoring, Type IIIC

The P2HZ X1 series of Safety Relays by PILZ offer you affordable and reliable feedback control loops, specifically designed to handle the monitoring of your external relays or contactors.

Features and benefits

• Specially designed for two handed control/operation. The P2HZ series will not function unless the operator has their hands outside the danger zone area during hazardous movement.
• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)
• Reactivation: The outputs will no re-energise unless both operator elements have been released and then re-operated simultaneously.
• Suitable for DIN rail mounting
• Durable and has an extended service life vs. competitors

Safety features

• The relay will provide the circuit self-monitoring.
• The safety functions of the device remain in effect even in the case of component failures.
• The relay will prevent the circuit from further press strokes in the case of, relay failures, contact welding, coil defects or open/short circuits.

Applications

• Mechanical presses
• Hydraulic presses
• General safety circuits (in accordance with EN 60204-1)

Technical safety parameters

• EN 60204-1
• EN 954-1
• EN (IEC) 62061
• EN ISO 13849-1
• IEC 61511 – SIL 3

Simultaniety monitoring <0.5s
Delay on de-energisation 15ms approx
Operating temperature -10 to +55°C

Standards

EN574 (type III C)

//media.rs-online.com/t_line/L239108-01.gif

Standards

PREN 574

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Channels 1, 2
Auxiliary Contacts 1
Function Two-Hand Control
Safety Contacts 3
Range PNOZ X
Terminal Type Screw
Length 87mm
Width 45mm
Depth 121mm
10 Within 4 working day(s) (Global stock)
12 Within 4 working day(s) (Global stock)
Price Each
MYR 2,623.82
units
Per unit
1 +
MYR2,623.82
Related Products
Safety relay for two-handed controlsDuring dangerous movements, the ...
Description:
Safety relay for two-handed controlsDuring dangerous movements, the relay requires the operator to keep both hands out of the danger zoneApplications: mechanical presses, hydraulic presses, safety control circuitsRemovable terminals with connection via spring terminalsDisplay LEDs for relay statusDIN rail ...
Stop-Category 0 acc. EN 60204-1Applications up to Category ...
Description:
Stop-Category 0 acc. EN 60204-1Applications up to Category 4 acc. EN 954-1, to SIL 3 according to EN62061 and PL e according to EN13849-1Can be used as emergency stop and safety gate monitorManual reset with self-monitoring on each ON-OFF cycleCross ...
Multi-function safety modules / SRB-E-322ST. STOP 0 / ...
Description:
Multi-function safety modules / SRB-E-322ST. STOP 0 / 1 Function1 oder 2-channel control3 safety contacts STOP 02 Safety outputs STOP 1Drop-out delay 0 … 30 s.
The PNOZ X3 range of Safety Relays by ...
Description:
The PNOZ X3 range of Safety Relays by PILZ introduces your circuit to a safety related interruption wherein the primary applications are typically in potential hazardous environments where you need that quick power cut off. Particularly useful in automated environments ...