Pilz 24 V ac/dc Safety Relay Dual Channel With 2 Safety Contacts

  • RS Stock No. 239-1049
  • Mfr. Part No. 774303
  • Manufacturer Pilz
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

PILZ PNOZ X2 Safety Relay, Multi-Channel (Dual)

The PNOZ X2 series from PILZ offering reliable performance to your safety circuitry. Confidence in monitoring your safety circuits has never been easier than with the use of a PILZ X2.

Features and benefits

• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Several connection options are available for ESTOP pushbuttons, Safety gates & reset buttons.
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)
• Suitable for DIN rail mounting
• The safety function will remain effective in the case of a component failure
• Monitored manual reset is an option with this relay

Safety features

• The circuit is redundant with built in self-monitoring

Applications

• Emergency stop buttons
• Safety curtains
• External relay/contactor monitoring
• Safety switch/interlocks

Specifications
Attribute Value
Supply Voltage 24 V ac/dc
Number of Channels 2
Function Light Beam/Curtain, Safety Switch/Interlock
Safety Contacts 2
Range PNOZ X
Reset Method Manual
Terminal Type Screw
Width 22.5mm
Depth 121mm
Length 87mm
23 Within 4 working day(s) (Global stock)
34 Within 4 working day(s) (Global stock)
Price Each
MYR 839.50
units
Per unit
1 - 5
MYR839.50
6 - 24
MYR813.26
25 +
MYR806.47
Related Products
Detects the stop condition of all types of ...
Description:
Detects the stop condition of all types of AC or DC motor driven machines which, when the motor runs down, produce a residual voltage in the windings. No additional sensor is required1 N/O and 1 N/C contacts, EN954-1 Category 3 ...
2 N/O instantaneous outputs provide stop category 0, ...
Description:
2 N/O instantaneous outputs provide stop category 0, 3 N/O timed contacts provide stop category 1 by allowing controlled deceleration of the motor until a complete stop is achieved4 solid state outputs for PLC signallingMonitored start button featureDelay time: 0 ...
Simultaneously monitors all of the sensor and actuator ...
Description:
Simultaneously monitors all of the sensor and actuator functions and ensures that outputs are shut down in a safety-relevant fashion. The safety relay has two terminals for the sensors: The cascading input CAS/OS as sensor input S1. The following components ...
Safety relay for emergency stop, safety doors, 1- ...
Description:
Safety relay for emergency stop, safety doors, 1- or 2-channel operation, cross-circuit detection, can be retriggered, fall back/tightening delay 0.2 s to 60 s, 2 enabling current paths, US = 24 V DC, plug-in spring-cage terminal block. Low housing width ...