Miller By Honeywell Front, Rear Attachment Stretchable reflective Hi-Vis Fall Arrest Harnesses & Vest

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SK
Product Details

Miller H Design Hi-Vis Vest Harness

Miller H-Design Hi-Vis vest and harness have been designed to use with the H-Design harness which ensures that you are visible from a distance. The vest is complete with DuraFlex 2 point harness and automatic loops. The harness has stretch webbing, 2 loops, auto buckles and the size 2 yellow high visibility vest.

HARNESS:

H Design DuraFlex
2 point harness
Stretch Webbing
Front and rear anchorage points
Quick buckles – Chest and leg straps size 2 – Aluminium breaking strength 900 daN
2 webbing loops
Shoulder straps – breaking strength 2200 daN
Other straps – standard webbing breaking strength 2700 daN
D ring – Steel finish, Zinc plated breaking strength 2300 daN
Sternal anchorage point
Long loops
Water repellent
Anti-stain

HI-VIS VEST

Hi-Vis
Side zippers
Double cursers
Inner zippers
Removable
Fits any body shape
Adjusts to all weather clothing
Easy to fix to the harness
2 Large slits allow height adjustment of sternal anchor point and chest straps
1 Back slit with hook and loop fastening to sustain D ring

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Specifications
Attribute Value
Harness Attachment Point Front, Rear
Harness Size M/L
Belt Included No Belt
Adjustable Straps Chest, Leg, Shoulder
Buckle Type Quick Connect
Hi-Vis Yes
Reflective Yes
Padding None
Harness Colour Black, Green, Yellow
Weight Capacity 140kg
Fastener Material Aluminium
1 Within 4 working day(s) (Global stock)
5 Within 4 working day(s) (Global stock)
Price Each
MYR 1,416.93
units
Per unit
1 +
MYR1,416.93
Related Products
REBEL galvanised cable self-retracting lifelines are durable, do ...
Description:
REBEL galvanised cable self-retracting lifelines are durable, do not compromise safety and operate to a high standard. The housing for the cable is heavy-duty thermoplastic and also includes a built-in ergonomic carrying handle and a side cable exit. A top ...
The Rebel™ self retracting lifeline (SRL) line is ...
Description:
The Rebel™ self retracting lifeline (SRL) line is built to last providing an economical fall protection solution without compromising performance or safety. The Rebel™ 3-Way SRL features a built-in emergency retrieval winch, 140kg user capacity and a robust design ensuring ...
Galvanized steel cable of Ø 4.8 mm & ...
Description:
Galvanized steel cable of Ø 4.8 mm & length 20 mBraking systemLifting load capacity 125 kgEquipped with steel screw locking KarabinerHandle rotating mechanism for lifting or loweringWeight 7.5 kgFor use with tripod, see stock number 861-0466.
The block allows falls to be arrested and ...
Description:
The block allows falls to be arrested and is designed to enable easy retrieval of a fall victim. Multi-purposeFall arrest modeWinch modeGalvanised steel wire ropeRobust & durable plastic casingSwivel anchorage eyeSteel swivel hook with load indicatorBreaking strength 15 kNWeight 14.80 ...