1000 MM METRIQUE REGLET INOX 1 FACE

  • RS Stock No. 188-3915
  • Mfr. Part No. DELA.1056.1000
  • Manufacturer Facom
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

6 drawers = 25 modules distributed in the 60 and 130 mm drawers: - 3 drawer 60 mm wall = 15 modules. - 2 drawer 130 mm wall = 10 modules. - 1 drawer 200 mm wall.
The 200 and 270 mm drawers can also be fitted with modules.
Supplied with 12 partitions for 60 mm drawers and 4 partitions for 130 mm drawers.
Total load in the drawers: 235 kg.
Wall storage capacity: 255 litres.
Drawer useful size: L.948 x D.421 x H.60 / 130 / 200 mm.
Furnished with 8 separators for drawers of 60 mm and 8 separators for drawer of 130 mm.

Specifications
Attribute Value
Length 1000mm
Imperial or Metric Metric
Material Stainless Steel
Width 30mm
1 Within 4 working day(s) (Global stock)
24 Within 4 working day(s) (Global stock)
Price Each
MYR 125.78
units
Per unit
1 +
MYR125.78
Related Products
Innovative, Swiss-made 2 m folding rule with additional ...
Description:
Innovative, Swiss-made 2 m folding rule with additional functionsFibreglass-reinforced polyamide, scratchproof, shatter-proof, weatherproof and washableInterior and depth gauge using extendible depth extensionHinge with 90° angle measurement scale for measuring anglesPushbutton locking of depth gauge on third rule ...
Metre rule made from white beech with closely ...
Description:
Metre rule made from white beech with closely spaced 3 mm-thick armsEmbedded hinges with steel springs and covered rivetsWhite/yellow, with water-, wear- and solvent-resistant protective varnish surface finishRed heads, black scale divisions, red tens digits, cm/mm divisions on both edgesAccuracy ...
Every part of the set is available separately, ...
Description:
Every part of the set is available separately, and the heads locate, slide and lock on to the rule to give precise squaring, centring and angular alignment with respect to the rule edge. Instructions are supplied with each part.,Rule: 11 ...
Marked with supporting points on side faceWorking surfaces ...
Description:
Marked with supporting points on side faceWorking surfaces and side faces are fine groundAll straight edges individually marked with serial numberLength: 2000mmHeight: 60mmThickness: 12mmTolerance: μm 58Data Sheet: LDS 1042DStraight Edges.