- RS Stock No.:
- 208-0176
- Mfr. Part No.:
- HK 1214 RS
- Manufacturer:
- SKF
47 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR47.03
Units | Per Unit |
1 + | MYR47.03 |
- RS Stock No.:
- 208-0176
- Mfr. Part No.:
- HK 1214 RS
- Manufacturer:
- SKF
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
The SKF drawn cup needle roller bearings have a deep drawn, thin-walled outer ring. Drawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly, but where a very compact and economical bearing arrangement is required. These bearings are mounted with a tight interference fit in the housing. That enables a simple and economic design of the housing bore, as shoulders or snap rings are not required to locate the bearing axially.
The drawn cup of hardened steel and the needle roller and cage assembly of these bearings form a non-separable unit.
The drawn cup of hardened steel and the needle roller and cage assembly of these bearings form a non-separable unit.
Accommodate heavy axial loads and peak loads
The very small diameter deviation of the rollers within one assembly enables these bearings to accommodate heavy axial loads and peak loads.
Extended bearing service life
To prevent stress peaks, the roller ends are relieved slightly to modify the line contact between the raceway and rollers.
The very small diameter deviation of the rollers within one assembly enables these bearings to accommodate heavy axial loads and peak loads.
Extended bearing service life
To prevent stress peaks, the roller ends are relieved slightly to modify the line contact between the raceway and rollers.
Specifications
Attribute | Value |
---|---|
Inside Diameter | 12mm |
Outside Diameter | 18mm |
Roller Bearing Type | Needle |
Race Width | 14mm |
Bore Type | Parallel |