Drawn Cup Needle Roller Bearing HK1514RSL271, 15mm I.D, 21mm O.D

  • RS Stock No. 137-1738
  • Mfr. Part No. HK1514RSL271
  • Manufacturer INA
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Drawn Cup Needle Roller Bearings

INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit. Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.

Features and Benefits

• Lower operating costs • Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise

Product Application Information

These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity. Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.

Suffixes

2RS - Contact seals on both sides RS - Contact seal on one side
ZW - Double row design, with lubrication hole

INA

Specifications
Attribute Value
Inside Diameter 15mm
Outside Diameter 21mm
Roller Bearing Type Drawn Cup Needle
Race Width 14mm
Bore Type Parallel
Material Steel
Static Load Rating 9800N
Cage Material Sheet Steel
Number of Rows 1
Dynamic Load Rating 7800N
End Type Sealed
Limiting Speed 9900rpm
Maximum Speed - Grease 9900rpm
Fatigue Limit Load 1190N
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 35.48
units
Per unit
1 - 4
MYR35.48
5 - 9
MYR34.09
10 - 24
MYR33.32
25 +
MYR32.66
Related Products
Cylindrical roller thrust bearings are suitable for arrangements ...
Description:
Cylindrical roller thrust bearings are suitable for arrangements that have to support heavy axial loads. They are relatively insensitive to shock loads, are very stiff and require little axial spaceAs standard they are available as single direction bearings and can ...
SKF Needle Roller Bearings have low sectional height ...
Description:
SKF Needle Roller Bearings have low sectional height and very high load carrying capacity for their size. Needle roller with inner ring Extremely suitable for bearing arrangements where radial space is limitedNeedle Roller Bearings without flanges are separable, i.e. the ...
The series designations in accordance with ISO 355 ...
Description:
The series designations in accordance with ISO 355 consist of a digit and two letters. The digit represents the contact angle. The two letters represent the diameter and width series, respectively. This is followed by a three-digit bore diameter d ...
These series comprise radial needle roller bearings and ...
Description:
These series comprise radial needle roller bearings and a rolling bearing component capable of supporting axial loads. They can support high radial forces as well as axial forces in one direction, while NKIB can support axial forces from both directions, ...