BEL POWER SOLUTIONS INC 3.3 V, 5 V, ±12 V 4 A, 12 A, 50 A, 60 A Power Supply 90 → 264V ac Input, 500W

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

250W & 500W CompactPCI®, CPA Series

Fully compliant to the PICMG® 2.11 power interface specification using a standard Positronic 47-Pin connector
At 50°C delivers 40A on both the +5 and +3.3 volt outputs
Remote sense and active current share on the +5, +3.3 and +12 volt outputs, along with internal ORing FETs, allow these units to be used in redundant, hot-swap applications
High current density & output power in industry standard package (3U x 8HP)
Single wire active current share and remote sense on +5, +3.3, and +12V outputs
Over temperature, over current and over voltage protection
Input good and power supply fault LED indicators
Inhibit and enable inputs
Meets international safety standards and displays the CE Mark for Low Voltage Directive

Note

250W with 400l/min forced air cooling.
Power derating above 50°C is 2.5% per °C.

Standards

UL1950, CSA22.2 No 950-95, EN60950 (TUV)

Specifications
Attribute Value
Input Voltage 90 → 264V ac
Load Regulation -220 mV, ±10 mV, ±50 mV
Output Voltage ±12 V, 3.3 V, 5 V
Output Current 4 A, 12 A, 50 A, 60 A
Power Rating 500W
Number of Outputs 4
MTBF 195000h
Line Regulation ±10mV
Ripple And Noise 5mV Pk-Pk
Weight 1.7kg
Depth 233.35mm
Width 40.34mm
Minimum Temperature -25°C
Maximum Temperature +50°C
Length 172.02mm
Temporarily out of stock - back order for despatch when stock is available
Price Each
MYR 3,576.49
units
Per unit
1 - 4
MYR3,576.49
5 - 9
MYR3,526.41
10 - 24
MYR3,477.05
25 - 49
MYR3,341.81
50 +
MYR3,204.21
Related Products
The Bel Power Solutions Inc. W series switch-mode ...
Description:
The Bel Power Solutions Inc. W series switch-mode power supply is dual output primary controlled AC-DC or DC-DC flyback converter with a constant switching frequency of 130kHz. Its high-efficiency results from the power-factor-corrected, single-step conversion of the input voltage to ...
The Convert Select series are DIN Rail mountable ...
Description:
The Convert Select series are DIN Rail mountable DC-DC and AC-DC converters. They have power factor correction with low harmonic distortion, negligibly low inrush current, high immunity to transients and surges, and low electromagnetic emissions. Internal protection circuits such as ...
PFC375 series are ac/dc power supplies that incorporate ...
Description:
PFC375 series are ac/dc power supplies that incorporate high performance midrange power, power factor correction (PFC) and high reliability. Suitable for use in commercial and industrial applications. These power supplies deliver a tightly regulated dc power in single & multiple ...
MAP110 series are low cost power supplies that ...
Description:
MAP110 series are low cost power supplies that meet industrial and commercial requirements. Wide dynamic output current and fixed-frequency operation simplifies system level operation. Single output models feature wide-range adjustable outputs to meet a variety of standards and user-specific output ...