Polyplumb Plastic Pipe Stiffener, 15mm

  • RS Stock No. 784-5021
  • Mfr. Part No. PB6415-10
  • Manufacturer Polyplumb
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Polyplumb Pipe Stiffener

Pipe stiffeners are an integral part of the joint when using Polyplumb pipe with either Polyplumb fittings or compression fittings, and need to be fully inserted in to the pipe end. They are not required when using copper pipe

Time efficient, no nonsense one step joint process
Polyplumb plastic pipe stiffeners are used when jointing sections of Polyplumb pipe
Suitable for Domestic / Central Heating
25 year guarantee against defects in materials or manufacture of the Polyplumb system

Approvals

Kitemarked, British Gas & WRAS Approved

Air Ring Main System

The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points.

No need to prepare threaded pipe or apply solvent
Easy and quick to install, simple push-in connections
Safe, secure and leak-proof, ready for immediate use
Unique collet locking system holds tube firmly without deformation or flow restriction
Easy to disconnect and reconfigure the system
Instruction leaflet included

Temperature Range 0 to + 70°C
Working Pressure @ +23°C = 10 bar (145 psi)
Working pressure @ +70°C = 7 bar (101 psi)
Pipe tolerances: +0.05 to -0.10mm OD
Material, pipe: rigid (unplasticised) Nylon 12
Material, fittings: bodies engineering plastic (black acetal copolymer) or brass
'O' Rings: Nitrile rubber
Collets: acetal polymer with stainless steel teeth

Specifications
Attribute Value
Accessory Type Pipe Stiffener
Compatible Pipe Size 15mm
Material Plastic
5 In Global stock for delivery within 4 - 6 working days
Price 1 Bag of 10
Was MYR24.13
MYR 23.88
Bag(s)
Per Bag
Per unit*
1 - 9
MYR23.88
MYR2.388
10 +
MYR21.89
MYR2.189
*price indicative
Related Products
Male brass thread to plastic push-in connector:. Suitable ...
Description:
Male brass thread to plastic push-in connector:. Suitable for central heating systemsPush-fit and demountable connections Corrosion free No scale build upBSI and WRAS approved.
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.