Terasic P0039 SDI to HSMC Adapter Board

  • RS Stock No. 768-9035
  • Mfr. Part No. P0039
  • Manufacturer Terasic
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Terasic SDI HSMC Board

The Transceiver Serial Digital Interface (SDI) HSMC board provides a hardware platform for developing video broadcasting systems. It is intended to be used by customers to implement and design SDI and AES systems based on transceiver-based host boards with an HSMC interface. It can also be part of an openly sold Development Kit, or bundled with packages of software and IP cores.

2 x SDI transmit (TX) channels with SDI cable tri-speed drivers
2 x SDI receive (RX) channels with SDI cable equalizers
2 x 75Ω BNC SDI TX interfaces
2 x 75Ω BNC SDI RX interfaces
Adjustable 1.1 to 1.8V and standard 3.3V CMOS Input Signal Levels
2 x RS-422 transceivers for AES3 TX and AES3 RX channels
2 x 75Ω BNC AES3 RX interfaces
2 x 75Ω BNC AES3 TX interfaces
High frequency switching regulator for 12V to 5V power supply conversion
3 x linear regulators for 5V to 3.3V low noise power supply conversion
FDTIM analysis for power distribution network (PDN) decoupling
SDI multi-frequency VCXO femto clock video PLL
98.304MHz / 90.3168MHz / 122.88MHz / 112.896MHz voltage-controlled crystal oscillator (VCXO) based phase-locked loop (PLL)
LVPECL differential clock buffer with two differential outputs - HSMC and SMA
4 x digital audio isolation transformers
Multi-format video sync separator
HSMC connector for interface conversion, fully compatible with HSMC host boards

Supplied with

System CD ROM

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Kit Classification Adapter Board
Kit Name SDI to HSMC
Temporarily out of stock - back order for despatch 15/04/2020, delivery within 4 working days from despatch date
Price Each
MYR 2,865.57
units
Per unit
1 +
MYR2,865.57
Related Products
±0.5ppm INL (Typ)104dB SNR (Typ) at 1Msps148dB Dynamic ...
Description:
±0.5ppm INL (Typ)104dB SNR (Typ) at 1Msps148dB Dynamic Range (Typ) at 61spsGuaranteed 32-Bit No Missing CodesConfigurable Digital Filter with SynchronizationRelaxed Anti-Aliasing Filter RequirementsDual Output 32-Bit SAR ADC32-Bit Digitally Filtered Low Noise Output24-Bit Differential + 7-Bit Common Mode 1Msps ...
The Pmod WiFi provides wireless communication through a ...
Description:
The Pmod WiFi provides wireless communication through a Microchip MRF24WG0MA Wi-Fi™ radio transceiver module. • IEEE 802.11g-compliant 2.4GHz ISM band RF transceiver• OTA data rate: 2Mbps• Range: 400m (Line of sight)• Serialized unique MAC address• PCB antenna• Radio regulation ...
The Trenz electronic is an MPSoC module integrating ...
Description:
The Trenz electronic is an MPSoC module integrating a Xilinx Zynq UltraScale+ ZU9EG. It comes with 4Gb DDR4 SDRAM along with a 64-bit width, 128Mb flash memory for configuration and operation. This board has 20GB transceivers and powerful switch-mode power ...
The Trenz electronic carrier board is an industry-grade ...
Description:
The Trenz electronic carrier board is an industry-grade FPGA module integrating a Xilinx Kintex-7 325T FPGA, 8 MGTs (Multi-Gigabit Transceivers) and 32Mb flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged ...