Trenz Electronic GmbH TE0711-01-100-2C High IO Xilinx Artix-7 100T Module with speedgrade 2C and USB TE0711-01

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Trenz Electronic GmbH Programmable Logic Development Kits

The Trenz electronic is an FPGA module integrating a Xilinx Artix-7 100T FPGA, 32Mb Quad SPI flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged high-speed stacking strips provide a large number of configurable I/Os. All this on a tiny footprint, smaller than a credit card. It has an electric rating of either 3.3V or 3.3V and 5V. It is used for industrial applications.

Features and Benefits:

• 100MHz MEMS oscillator
• AES bit-stream encryption
• Dual 100MBit Ethernet
• eFUSE bit-stream encryption
• Evenly spread supply pins for good signal integrity
• It has 200MHz speed
• Lead free
• MAC address EEPROM
• on-board high efficiency DC-DC converters
• Operating temperature ranges between 0°C and 70°C
• Plug-on module with two 100-pin hermaphroditic stacking strips
• Rugged for shock and high vibration
• Single-ended FPGA I/O pins available on B2B strips Up to 112
• System management and power sequencing

Certifications:

• WEEE

Specifications
Attribute Value
Classification Module
Programmable Logic Technology CPLD, FPGA
Technology CPLD, FPGA
For Use With Modules in 4 x 5 cm Form Factors
Featured Device TE0711-01
Kit Name High IO Xilinx Artix-7 100T Module with speedgrade 2C and USB
3 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 827.87
units
Per unit
1 +
MYR827.87
Related Products
The USB2.0 Hi-Speed to MPSSE SPI Module, VA800A-SPI, ...
Description:
The USB2.0 Hi-Speed to MPSSE SPI Module, VA800A-SPI, is a small electronic circuit board, utilising the FTDI FT232H. The 10 pin connector on the module fits directly to the FTDI VM800B and VM800C graphic display modules. This allows direct control ...
The EBM002 sensor module features an on-board standard ...
Description:
The EBM002 sensor module features an on-board standard shaft rotary potentiometer and can be used with the EB090 e-block Sensor Board alongside other sensor modules from Matrix TSL.Key Benefits of the EBM002•Flowcode software with 30 day free trial•0.1 inch pitch ...
The MCP2200 Breakout Module allows for the evaluation ...
Description:
The MCP2200 Breakout Module allows for the evaluation and development of the MCP2200 serial converter. Dual In-Line Package (DIP) Form Factor BoardUART Tx and Rx signalsUART RTS and CTS signals8 General Purpose (GP) linesUser selectable power supply of 3.3 V ...
The PmodUSBUART provides a seamless bi-directional link between ...
Description:
The PmodUSBUART provides a seamless bi-directional link between a USB bus and a UART serial bus. It is based on the FT232RQ Bridge device. • MicroUSB connector• Powered from USB connection• Jumper link option to power system board from Pmod ...