Eurotherm Voltage to Voltage Signal Conditioner, Voltage 0 → 10 V, 0 → 5 V, 2 → 10 V Input

  • RS Stock No. 790-3612
  • Mfr. Part No. EPACK-1PH/63A/24V/XXX/V2
  • Manufacturer Eurotherm
Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): PL
Product Details

EPack - Compact SCR Power Controller

EPack power controller is a compact fully featured power controller, combining a high level of functionality and configurability with simplicity of setup and operation. The combination of advanced configurable firing modes allows close matching to load characteristics for maximum process efficiency. EPack is highly configurable and may be adapted for current and future needs using a software key to purchase additional functionality when needed.

Nominal load current from 32A (Stock-no.: 790-3619 & 800-6716) and 63A (Stock-no.: 790-3612 & 800-6725)
24V & 500V versions available
Analogue input signal (voltage and current)
High definition 1.5" TFT display
Configurable via iTools (PC software) or front panel
V2, I2 or true power control
Energy usage measurement
Advanced load diagnostics
Integrated dual port Ethernet switch for “daisy chained” communications
Plug and play Ethernet communications with Zero configuration networking
Modbus® TCP protocol
Compact DIN Rail and bulkhead Mounting Format

Specifications
Attribute Value
Input Range 0 → 10 V, 0 → 5 V, 2 → 10 V
Output Range 0 → 10 V, 0 → 5 V, 2 → 10 V
Supply Voltage 24 V ac/dc
Mounting Type DIN Rail
Minimum Operating Temperature 0°C
Maximum Operating Temperature +45°C
Operating Temperature Range 0 → +45 °C
1 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 3,466.44
units
Per unit
1 +
MYR3,466.44
Related Products
Wago 857 series JUMPFLEX threshold value switch for ...
Description:
Wago 857 series JUMPFLEX threshold value switch for monitoring analogue standard signals and reporting signals exceeding a preset threshold. PC configuration interface Digital switching output Changeover contact relay output Calibrated scale switching Threshold value configuration via DIP switches and teach-in ...
Wago 857 series JUMPFLEX loop powered RTD temperature ...
Description:
Wago 857 series JUMPFLEX loop powered RTD temperature signal conditioner records Pt100, Pt200, Pt500 and Pt1000 sensors and resistors up to 4.5 kΩ, converting the temperature signal into an analogue signal on the output side. No additional supply voltage required ...
The MTLx525 enables an on/off device in a ...
Description:
The MTLx525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low power devices that are ...
The MTL MTL5000 series signal conditioner, Solenoid/Alarm Driver, ...
Description:
The MTL MTL5000 series signal conditioner, Solenoid/Alarm Driver, isolated voltage output. This enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as ...