Molex ServiceGrade Plier Crimping Tool for Open Barrel Terminal

  • RS Stock No. 710-6499
  • Mfr. Part No. 63811-1000
  • Manufacturer Molex
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Molex ServiceGrade Hand Crimping Tool for Open Barrel Crimp Terminals

Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

ServiceGrade Hand Crimping Tool - Overview

From Molex a low cost ServiceGrade manual crimping tool with a sturdy construction tested to a minimum of 1000 cycles. This crimping tool consists of two ergonomically designed, anti-slip, soft grip handles with a small handle spread making the tool comfortable to use. The crimping jaws contain a range of conductor and insulation profiles and can accommodate a range of material thicknesses and conductor barrel lengths making this crimp tool a versatile solution for a wide range of crimping requirements

Key Features and Benefits

• Service life of 1000 cycles
• Easy to use
• Ergonomically designed handles with small handle spread for comfortable use
• Accepts a wide range of material thicknesses and barrel lengths

Applications

This ServiceGrade hand crimping tool is ideal for use in low volume field repairs and prototyping and is commonly used by electrical contractors and technicians.

Questions and Answers

What Terminals can these Crimping Tools be used with?
This ServiceGrade hand crimping is for use with Molex open barrel crimp terminals with a wire size range from 24 AWG to 14 AWG
The crimping jaws accept material thicknesses from 0.15 mm to 0.40 mm and conductor barrel lengths from 2 mm to 3.5 mm

Molex Hand Crimping Tools

Specifications
Attribute Value
Series ServiceGrade
Crimp Tool Type Plier
Crimp Connector Type Open Barrel Terminal
Primary Keyword Crimping Tool
7 Within 2 working day(s)
67 Within 4 working day(s) (Global stock)
Price Each
MYR 236.52
units
Per unit
1 +
MYR236.52
Related Products
The Knipex crimping pliers are designed to crimp ...
Description:
The Knipex crimping pliers are designed to crimp end sleeves (ferrules) from 0.25 mm² to 16 mm². The high leverage handles, improve the effort for crimping by 30% compared to normal pliers. Crimping in marked half round dies for reliable ...
A range of crimp tools for crimping Han-Fast ...
Description:
A range of crimp tools for crimping Han-Fast Lock straight and angled PCB contacts onto wire. These crimp tools feature a ratchet mechanism which prevents the handles opening until the crimp cycle is complete. An emergency release lever is available ...
The YC-082 is a ratchet sytle handtool, designed ...
Description:
The YC-082 is a ratchet sytle handtool, designed specifically to crimp our loose piece SMF-01T-1.3 contact.
Klauke's high-performance crimping tools for tubular terminals and ...
Description:
Klauke's high-performance crimping tools for tubular terminals and butt splices feature a rotating profile disc that offers hexagonal crimping in a range of K05 6 to 50 mm², K08 16 to 95 mm², K09 25 to 150 mm². For suitable ...