Can be directly connected to DPO4000, MSO4000 and DPO7000 oscilloscopes using the TekVPI interface
Rise time: ≤17.5 ns
RMS max. current: 150 A
Max. inrush peak current: 500 A
Operating temperature: 0 → 50°C
The Tektronix is a high performance and easy-to-use 150A AC/DC current probe designed for use and direct connection to the TekVPI™ probe interface. This AC/DC current measurement probe provides 20MHz of frequency bandwidth with selectable range control for 25A and 150A measurement ranges. It also provides low-current measurement capability and accuracy to current levels as low as 5mA per division, important for achieving a broad dynamic current range of high-level and low-level measurement signals.
Easy-to-use and accurate AC/DC current measurements
Connects directly to oscilloscopes with the TekVPI™ probe interface
Low noise and DC drift
Provides automatic units scaling and readout on the oscilloscope's display
Remote GPIB/USB probe control through the oscilloscope
Split-core probe head construction allows easy connection to conductors
Easy to degauss and autozero
set-up controls and probe status and diagnostic indicators are provided on both the probe hardware and through an easy-to-access scope UI display menu
Power supplies
Semiconductor devices
Power inverters/converters
Electronic ballasts
Industrial/consumer electronics
Motor drives
Transportation systems
CAT I 600V
CAT II 600V
CAT III 300V
CAT I
CAT II
CAT III
Attribute | Value |
---|---|
Current | 150A |
Probe Type | AC/DC |
Minimum Bandwidth | 0Hz |
Maximum Bandwidth | 20000kHz |
Maximum Conductor Size | 21 x 25mm |
Safety Category | CAT I 600 V, CAT II 600 V, CAT III 300 V |
Series | TCP |
Safety Category Level | CAT I, CAT II, CAT III |
Model Number p | TCP 0150 |
Best Accuracy | ±1 % |
Safety Category Voltage | 300 V, 600 V |
Bandwidth | DC → 20 MHz |