EA Elektro-Automatik PLC Expansion Module Interface

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Interface Cards for PSI and EL Series

Can be retrofitted, simple to install using plug and play
Simple configuration via setup menu on the device
Gateway function with 2 cards (PSI 9000)
Simple networking of different devices
Master-slave mode support
Share-bus mode support
Galvanic isolation up to 2000 V

EA-IF-U1 USB INTERFACE

USB and VCP drivers
LabView VIs
System link mode
Transmission speed: max. 57600 Bd

Analogue (IF-A1)

Adjustable voltage range (e.g. B. 0 to 5 V, 2 to 7 V)
Digital and analogue input and outputs
Parameterisable outputs / inputs
Galvanically isolated

IEEE/GPIB (IF-G1)

Command execution time: < 5 ms
SCPI command set
Up to 15 devices on bus
Networking of several different devices

RS232 for part numbers (IF-R1 / IF-R2)

Variable baud rates up to 57600 Bd
System link mode
LabView VIs

Profibus (IF-PB1 / IF-PB2)

Profibus interface for EA-PS / PSI 8000
Complies with the IEC 61158-2 standard
Data transfer rate of up to 12 Mbit/s
Up to 32 devices on a single bus segment
Integrated IF-U1 functionality via addressable USB port

EA-IF-C1 CAN

Variable baud rates up to 1 Mbit/s)
CAN2.0A-compatible
Gateway to USB or RS232 (only with PSI 9000)
Relocatable address segments
Integrated bus connection

EA-IF-E1 Ethernet interface

IF-E1 interface, EA-PS / PSI 8000
SCPI control command set
HTTP server with user control interface
Integrated IF-U1 functionality via addressable USB port

EA-IF-E2B Ethernet interface (LAN)

SCP command set
Web control interface
Integrated IF-U1 functionality by additional USB port

Supplied with

Software CD with instructions and tools

Note

MPN 33100214, same product as 673-6834

Elektro-Automatik

Discontinued product
Related Products
Serial Communication Modules supporting Host Link, No-protocol, NT ...
Description:
Serial Communication Modules supporting Host Link, No-protocol, NT Link (1:N), Serial PLC Link, Serial Gateway (CompoWay/F master, Modbus-RTU master) and Modbus-RTU easy master functions. CP1W-CIF01 RS-232C module (stock no. 401-484) and CP1W-CIF11 RS-422A/485 (401-478) may be used with either CP1L ...
Professional range of FX3G series interface adapters from ...
Description:
Professional range of FX3G series interface adapters from Mitsubishi Electric. These interface adapters provide a second RS422 interface for connection of an additional device to the controller. All models are excellent quality and highly reliable. • Can build the function ...
SIMATIC Net communication processor and modules for connecting ...
Description:
SIMATIC Net communication processor and modules for connecting the SIMATIC S7-300 and ET200M to AS-Interface Configurable with STEP 7 ACCOR. AS-Interface SPEC. V3.0. SIMATIC NetAdvanced DP/AS-Interface linkNetwork transition Profibus DP/AS-Interface with master profile M3, M4 ACCIngress protection rating of IP20. ...
Communications connector: 4 x RJ‑45 jacks with MDI‑X ...
Description:
Communications connector: 4 x RJ‑45 jacks with MDI‑X assignment 10/100 Mbps (half / full duplex), autopolarity, autonegotiationNetwork cable: A standard Ethernet cable can be connected to the Ethernet interface. However, to minimize electromagnetic interference, Siemens recommends a shielded Ethernet cable ...