RS PRO Crimp Die Set

  • RS Stock No. 624-1308
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TW
Product Details

Hydraulic Crimper

This robust hydraulic crimping tool is compact and ideal for working in confined spaces. Having the benefit of spring loaded handles, the dies can be advanced using only one hand, therefore leaving the other hand free to position the connector. All models are highly reliable and excellent quality.

Features and Benefits:

• 180° rotational head
• Supplied with Die Sets
• Built-in safety valve
• Pressure release lever
• Housed in a moulded plastic carry case
• Comprehensive instructions included
• Cable Range: 25-185mm
• Crimping Force: 50kN
• Rated Operating Pressure: 600 bar (8600 psi)

What do you get?

• RS Pro Hydraulic Crimp Tool
• Die Set: 6 mm², 10 mm², 16 mm², 25 mm², 35 mm², 50 mm², 70 mm², 95 mm², 120 mm², 150 mm² and 185 mm²
• Plastic Case

RS PRO Die Sets Available Separately

• RS Stock no: 624-1358, 624-1308, 624-1336, 624-1320

Typical Applications

• Maintenance and repair
• Electrical Installations
• Cable assemblies

FAQ:
How easy are they to use?

Although this kit may look intimidating at first glance, it’s fairly simple to use. During application prepare the cable and slide on the connector, select and insert the required die, insert the cable and connector. Holding the cable in position with one hand, prime the handle until the crimp tool starts to bite, once you feel resistance you can use both hands to increase the pressure and complete the union.

How do you maintain the product?

• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Note

Compatible with RS tube terminals typically stock no. 119-160

17 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 166.37
units
Per unit
1 - 4
MYR166.37
5 - 24
MYR153.90
25 - 74
MYR140.32
75 - 149
MYR130.29
150 +
MYR119.45
Related Products
All RS crimp tools are compatible with the ...
Description:
All RS crimp tools are compatible with the RS range of red, yellow, and blue terminals. • Load setting• Heat treated frame components• Black oxide finish• Full cycle ratchet controlled release• Red molded textured plastic grip.
Crimping dies for use in hydraulic crimping tool ...
Description:
Crimping dies for use in hydraulic crimping tool (stock number 876-2337) and hydraulic crimping head (TE part number 69051). Each crimping die consists of a stationary die and a moving die. Each die is marked with a colour coded dot ...
High quality die sets for use with the ...
Description:
High quality die sets for use with the universal crimp tool frame stock no. 848-391. The die sets are identified with the appropriate cable group in the price table. The &146;Cable Group to Cable Type Relationship&146; table lists the relevant ...
Profile jaws for crimp system tool KNIPEX 97 ...
Description:
Profile jaws for crimp system tool KNIPEX 97 43 200 (stock no. 336-8084)Profile die set for module plug, 0.5 → 2.5 mm2,AWG 20-13For roll crimping conductors and insulation in one operationWith four profiles for: 0.5 → 1 mm20.5 → 1 ...