Heavy duty starting
Increased switching frequency
High ambient temperature
Insufficient cooling
Break operation
Unbalance
The CM range of thermistor motor protection relays are used to control motors equipped with PTC temperature sensors. The PTC temperature sensors are incorporated in the motor windings to measure the motor heating. This enables direct control and evaluation of the following operating conditions:
Main features include:
Dynamic interrupted wire detection
Wide control supply voltage rang 24-240 V AC/DC
Short circuit monitoring of the sensor circuit
Non-volatile fault storage
Remote reset
Screw connection technology or Easy Connect Technology available
Single Sensor Input Version
Wire Break Detection
Technical Specification | ||||||
Manufacturer Part No. | Supply Voltage | Output | Manual Reset | Remote Reset | Test Button | Stock Number |
1SVR430800R9100 | 24Vac/dc | 1NO | No | No | No | 464-518 |
1SVR430801R1100 | 220-240Vac | 1NO | No | No | No | 464-520 |
1SVR430810R9300 | 24Vac/dc | 2CO | Yes | Yes | No | 464-570 |
1SVR430811R0300 | 110-130Vac | 2CO | Yes | Yes | No | 464-574 |
1SVR430811R1300 | 220-240Vac | 2CO | Yes | Yes | No | 464-568 |
1SVR430711R0300 | 110-130Vac | 2CO | Yes | Yes | Yes | 464-564 |
1SVR430711R2300 | 380-440Vac | 2CO | Yes | Yes | Yes | 464-558 |
1SVR430720R0400 | 24-240Vac/dc | 1NO 1NC | Yes | Yes | Yes | 464-552 |
1SVR430720R0300 | 24-240Vac/dc | 2CO | Yes | Yes | Yes | 464-546 |
Some products also have the ATEX approval for the use in hazardous areas.
Attribute | Value |
---|---|
Monitoring Application | Temperature |
Supply Voltage | 380 → 440 V ac |
Contact Configuration | DPDT |
Electrical Phase | 1 |
Time Delay | <100 ms |
Temperature Sensitivity | Overtemperature, Undertemperature |
Minimum Operating Temperature | -20°C |
Dimensions | 100 x 22.5 x 78 mm |
Height | 78mm |
Maximum Operating Temperature | +60°C |
Operating Temperature Range | -20 → +60 °C |
Width | 22.5mm |
Length | 100mm |