ON Semiconductor, Type-C Interface Detection Solution Evaluation Board USB-C Evaluation Board for FUSB302

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

The FUSB302 evaluation board (EVB) and included software allows customers a complete platform to evaluate the Type-C interface detection solution the FUSB302 provides. The EVB is designed for both stand-alone operation and connection to test equipment for specific testing requirements. The FUSB302 software provides both fully automatic control and manual control of the FUSB302 functions. With a single connection to a PC and a couple configurations in the GUI, the EVB can function as a source, sink or dual role port. The FUSB302 targets system designers looking to implement a DRP/DFP/UFP USB Type-C connector with low amount of programmability. The FUSB302 does the USB Type-C detection including attach, and orientation. The FUSB302 integrates the physical layer of the USB BMC Power Delivery (PD) protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.

Specifications
Attribute Value
Interface Function USB-C
Kit Classification Evaluation Board
For Use With FUSB302BMPX
Featured Device FUSB302
Kit Name Type-C Interface Detection Solution Evaluation Board
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 301.60
units
Per unit
1 +
MYR301.60
Related Products
The Pcam 5C is an imaging module that ...
Description:
The Pcam 5C is an imaging module that is used with FPGA (field-programming gate array) development boards. This Omnivision OV5640 5-megapixel camera on a single chip offers a cost efficiency and high-volume autofocus (AF). • System-on-chip (SOC) sensor with OmniVision ...
The HFBR-0543Z evaluation kit is used to evaluate ...
Description:
The HFBR-0543Z evaluation kit is used to evaluate HFBR-3810Z, a fibre optic link from Avago. HFBR-3810Z consists of a 650nm transmitter and receiver pair, with a pin to pin air gap distance of 25.1mm which provides transient voltage suppression of ...
The MIC23250 is a high efficiency 4MHz dual ...
Description:
The MIC23250 is a high efficiency 4MHz dual 400mA synchronous buck regulator with HyperLight Load® mode. Input voltage range: 2.7V to 5.5V Dual output current 400mA / 400mA Up to 94% peak efficiency and 85% efficiency at 1mA 33μA dual ...
Input voltage range: 2.375V to 5.5V Output voltage ...
Description:
Input voltage range: 2.375V to 5.5V Output voltage adjustable down to 1VStable with small, 2.2μF ceramic output capacitor 230mV typical dropout at 1A 1A minimum guaranteed output current ±2% initial accuracyLow ground current High PSRR: >60dB, up to 1kHz Output ...