MPLAB® PICkit 4 Debugger/Programmer

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC® and dsPIC® flash microcontrollers, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE), version 4.15. The MPLAB PICkit 4 is connected to the design engineer's computer using a high-speed 2.0 USB interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming™ (ICSP™). An additional micro SD card slot and the ability to be self-powered from the target means you can take your code with you and program on the go.*

The MPLAB PICkit 4 programs faster than its predecessor and comes ready to support PIC® and dsPIC® MCU devices. Along with a wider target voltage, the PICkit 4 supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway, while being backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP. The PICkit 4 also has a unique programmer-to-go function with the addition of a micro SD card slot to hold project code and the ability to be powered by the target board.*

*This functionality is coming soon with firmware update of the product through MPLAB X IDE.

Note: The PICKit 4 is compatible with MPLAB X IDE version 4.15.

The MPLAB PICkit 4 In-Circuit Debugger/Programmer supports many, but not all, PIC MCUs and dsPIC DSCs at this time. The firmware is continually being upgraded to add support for new devices. To request priority device support or to report issues, email: PICkit4_Update@microchip.com

Matches silicon clocking speed - Programs as fast as the device will allow
Target voltage of 1.20V to 5.5V - Wide target voltage supports a variety of devices
Can supply up to 50mA of power to the target - Can be powered from the target to program in the field*
Minimal current consumption at <100μA from target
Portable USB-powered and RoHS-compliant
8-pin single in-line header - Supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway
Backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP
Option to be self-powered from the target (2.7V to 5.5V)
Programmer-to-Go (PTG) support
SD card slot to holds program data
Press on the logo to program the target
Features and performance at a fraction of the cost of comparable debugger/programmers
Ease of maintenance and feature upgrade

Note: This functionality is coming soon with firmware update of the product through MPLAB X IDE.

Package Contents

MPLAB PICkit 4 In-Circuit Debugger/Programmer
USB to micro-B USB cable
Warranty card
2 MPLAB PICKit 4 stickers

Specifications
Attribute Value
Product Type Debugger, Programmer
For Use With PIC and dsPIC Microcontrollers
Kit Classification Development Kit
Kit Name MPLAB PICkit 4 In-Circuit
209 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 255.30
units
Per unit
1 +
MYR255.30
Related Products
This board acts as an adaptor to allow ...
Description:
This board acts as an adaptor to allow the programming of PIC10F2xx microcontrollers. Connects to MPLAB 2 ICDConnects to PICkit™ 1 Flash Starter KitConnects to PICSTART Plus ProgrammerConnects to BFMP Baseline Flash Microcontroller ProgrammerNo additional active or passive components required. ...
An In-Circuit Debugger (ICD) and programmer is used ...
Description:
An In-Circuit Debugger (ICD) and programmer is used to interface with the Single Wire Interface Module (SWIM) and JTAG/Serial Wire Debugging (SWD) for any STM8 or STM32 microcontroller on an application board.The ST-LINK/V2-ISOL can withstand 2500 Vrms of high isolation ...
The Analog Devices ADZS-ICE-1000/ ADZS-ICE-2000 are USB based ...
Description:
The Analog Devices ADZS-ICE-1000/ ADZS-ICE-2000 are USB based JTAG emulators. The emulators provide support in programming/debugging and testing in advance applications on the Sharc/Blackfin DSP and JTAG processors. The Analog Devices ICE-1000 and ICE-2000 works in conjunction with the CrossCore® ...
On-chip debug (OCD) interfaces can provide chip-level control ...
Description:
On-chip debug (OCD) interfaces can provide chip-level control of a microcontroller device and are frequently used to extract program code or data, modify memory contents or affect device operation while it is running. Manually locating available OCD connections can be ...