Parallax Inc Propeller QuickStart MCU Development Kit 40000

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Propeller Quickstart Evaluation Board

The QuickStart is an evaluation board for the Propeller. As an Open-Source reference design the QuickStart board provides basic Propeller circuitry. Developers may use our PCB layout files as their own to speed their project towards completion. As a project board the QuickStart is fully expandable and provides unimpeded access to all I/O pins through an expansion header but includes some button inputs and LEDs to demonstrate programming. With USB power and a selection of QuickStart Project examples it's also the fastest way to get up and running.

Propeller 8-core 32-bit microcontroller, 64KB EEPROM (32KB for program, 32KB for general-purpose use)
Bus-powered USB coupled with 3.3V regulator for 500mA
5MHz crystal on board may be disabled by removing SMT jumper, allowing replacement with external through-hole crystal
External brownout reset may be installed by removing SMT jumper
8 x blue LEDs on P16-P23
8 x resistive touch-buttons on P0-P7
Pads for sigma-delta A/D circuitry (two resistors and two capacitors, both 0603 footprint)
Expansion header provides access to Vss, Vdd, 32 I/O pins (28 x GPIO, 2 for I²C bus and 2 for optional Tx/Rx if connected to USB power)
Dimensions: 51 x 76mm
Open hardware reference design through our Altium and DipTrace PCB layout files (more export options may be possible)

Note

Also available: Human Interface Board for Quickstart, RS Part No. 779-2721

The Propeller™ 1 microprocessor chip makes it easy to rapidly develop embedded applications. Its eight 32-bit processors (COGs) can operate simultaneously, either independently or cooperatively, sharing common resources through a central hub. The developer has full control over how and when each cog is employed; there is no compiler-driven or operating system-driven splitting of tasks among multiple cogs. A shared system clock keeps each cog on the same time reference, allowing for true deterministic timing and synchronization. Two programming languages are available: the easy-to-learn high-level Spin, and Propeller Assembly which can execute at up to 160 MIPS (20 MIPS per COG).

Specifications
Attribute Value
Classification Development Kit
Kit Name Propeller QuickStart
Technology MCU
Processor Part Number P8X32A
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 212.07
units
Per unit
1 - 9
MYR212.07
10 +
MYR211.97
Related Products
The CY4500 EZ-PD Protocol Analyzer supports protocol analysis ...
Description:
The CY4500 EZ-PD Protocol Analyzer supports protocol analysis and decoding of the USB-PD (Power Delivery) and USB Type-C specifications packets on the Configuration Channel lines. The analyzer allows debugging of the USB Power Delivery communication. The CY4500 acts as a ...
The FX3 SuperSpeed Explorer Kit is enables developers ...
Description:
The FX3 SuperSpeed Explorer Kit is enables developers to add USB 3.0 serial interface device functionality to a system. The kit is based on the CYUSB301x family of EZ-USB FX3 USB 3.0 peripheral controllers. A fully accessible ARM9 core with ...
The UIC1WGEVB evaluation board showcases a simple, low ...
Description:
The UIC1WGEVB evaluation board showcases a simple, low cost, low part count chopper topology circuit. It is designed to safely operate with input voltages varying from 80 VAC to 280 VAC. ON Semiconductor CCRs are used to provide constant LED ...
The PSoC 4 M-Series Pioneer Kit enables evaluation ...
Description:
The PSoC 4 M-Series Pioneer Kit enables evaluation and development of the PSoC 4200M devices with the PSoC Creator or PSoC Programmer software. The Pioneer Kit features an ARM Cortex-M0 CPU with 128 KB Flash, 55 Inputs/Outputs and extended peripherals ...