Herga Differential Pressure Sensor, 1in wg Max Pressure Reading , 125 250 V ac, 10.5 mm Tube, 7.4 mm Tube

  • RS Stock No. 154-2475
  • Mfr. Part No. 6101-0045
  • Manufacturer Herga
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

GT27028 differential pressure switch Pressure range: 1.00 to 5.00 H20 Single pole change over contacts Diaphragm material: Post cured Silicone Burst pressure: 1 PSI Operating Temperature: -25°C to +105°C Electrical rating: 5A 250V AC Vertical mount recommended

Specifications
Attribute Value
Pressure Reading Type Differential
Minimum Pressure Reading 0.2in wg
Maximum Pressure Reading 1in wg
Accuracy ±0.08 inH2O
Output Type SPDT
Process Connection 7.4 mm Tube, 10.5 mm Tube
Electrical Connection Quick Connect
Maximum Current 5 A
Supply Voltage 125 250 V ac
Housing Material Polyphenylene Oxide
Minimum Operating Temperature -25°C
Maximum Operating Temperature +105°C
Series GT27027
Mounting Type Chassis Mount
53 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 196.33
units
Per unit
1 +
MYR196.33
Related Products
The Pmod DPG1 is a differential pressure gauge ...
Description:
The Pmod DPG1 is a differential pressure gauge module featuring an NXP MP3V5010DP piezoresistive transducer and a Texas Instruments ADCS7476 12-bit ADC. • 0 to 10kPa differential pressure range• Temperature compensated and calibrated• Host communication: SPI bus• Follows Digilent Pmod ...
Miniature, very low pressure, un-amplified differential transducer with ...
Description:
Miniature, very low pressure, un-amplified differential transducer with silicon diaphragm and ratiometric output. High sensitivity and low null shiftGauge measurements may be achieved by venting one port to atmosphereEasily interchangedSupplied with instruction leafletMedia: P1 Port Dry Gases only; P2 Port ...
Vacuum: 150mm (6in)WG to 670mbar (9.8psi)Factory preset to ...
Description:
Vacuum: 150mm (6in)WG to 670mbar (9.8psi)Factory preset to 9in WG pressure. External screw adjustmentCan be used to detect pressure differentials across a bulkhead. GF Polyester housing, silicone rubber diaphragm, silver plated contacts Body thread size: 14 x 1.4mm Pin diameter ...
These ultra-low pressure differential sensors provide an output ...
Description:
These ultra-low pressure differential sensors provide an output voltage proportional to applied pressure. They operate from a single positive supply voltage rating at 8V. Signal conditioning results in directly useable outputs and temperature compensation results, in predictable performance over the ...