RS PRO ATEX, IECEx Gauge for Gas, Liquid Pressure Sensor, 100bar Max Pressure Reading , 9 32 V dc, BSP 1/4,
- RS Stock No. 102-4131
- Manufacturer RS PRO
RS Pro IPS Series ATEX Pressure Transmitters
RS Pro IPS ATEX industrial pressure transducers are suitable for use in a wide range of industrial applications. A piezoresistive ceramic sensor gives excellent media compatibility within a stainless steel housing.
An incorporated microprocessor-based amplifier, requiring no adjusting, gives stable electronics, especially industrial applications.
Piezo-resistive thick film ceramic sensor
Stainless steel body
+/- 0.25% accuracy
Microprocessor based amplifier
Pressure ranges from -1 to 400 bar
Note
Temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate
| Attribute | Value |
|---|---|
| Pressure Reading Type | Gauge |
| Minimum Pressure Reading | 0bar |
| Maximum Pressure Reading | 100bar |
| Accuracy | ±0.25 % |
| Output Type | Analogue |
| Media Measured | Gas, Liquid |
| Process Connection | BSP 1/4 |
| Electrical Connection | DIN 46350 Connector |
| Analogue Output | 4 20 mA |
| Supply Voltage | 9 32 V dc |
| Housing Material | Stainless Steel |
| IP Rating | IP65 |
| Mounting Type | Threaded |
| Hazardous Area Certification | ATEX, IECEx |
| Maximum Operating Temperature | +80°C |
| Minimum Pressure Setting | -1bar |
| Maximum Pressure Setting | 400bar |
| Minimum Operating Temperature | -20°C |
