- RS Stock No.:
- 184-8233
- Mfr. Part No.:
- BD1HD500EFJ-CE2
- Manufacturer:
- ROHM
Discontinued product
- RS Stock No.:
- 184-8233
- Mfr. Part No.:
- BD1HD500EFJ-CE2
- Manufacturer:
- ROHM
Technical data sheets
Legislation and Compliance
Product Details
BD1HD500EFJ-C is an Automotive 1ch High-Side switch. It has a built-in overcurrent protection circuit, Thermal Shut Down (TSD) circuit, Open Load Detection circuit, Under Voltage Lock Out circuit, and has diagnostic (ST) output function at the time during abnormal detection.
Built-in overcurrent protection circuit
Built-in Thermal Shut Down (TSD)
Built-in Open Load Detection circuit (When Output is OFF)
Possibility to control directly from CMOS logic IC
Low standby current
Built-in Under Voltage Lock Out circuit
Built-in diagnostic (ST) output function
Low On resistance of RDS (ON) =500mΩ (Typ) (VDD=12V, Ta=25°C, IOUT=0.25A)
Monolithic power IC that has a built in control part (CMOS) and a power MOS FET on 1chip
1ch High-side switch for the mechanical relay coil drive
Built-in Thermal Shut Down (TSD)
Built-in Open Load Detection circuit (When Output is OFF)
Possibility to control directly from CMOS logic IC
Low standby current
Built-in Under Voltage Lock Out circuit
Built-in diagnostic (ST) output function
Low On resistance of RDS (ON) =500mΩ (Typ) (VDD=12V, Ta=25°C, IOUT=0.25A)
Monolithic power IC that has a built in control part (CMOS) and a power MOS FET on 1chip
1ch High-side switch for the mechanical relay coil drive
Specifications
Attribute | Value |
---|---|
Power Switch Type | High Side Switch |
Power Switch Topology | High Side |
Switch On Resistance | 1200mΩ |
Number of Channels | 1 |
Maximum Operating Supply Voltage | 18 V |
Maximum Operating Current | 3mA |
Power Rating | 2.1W |
Mounting Type | Surface Mount |
Package Type | HTSOP |
Pin Count | 8 |
Maximum Operating Temperature | +150 °C |
Minimum Operating Temperature | -40 °C |
Dimensions | 4.9 x 3.9 x 0.85mm |
Series | IPS Series |
Automotive Standard | AEC-Q100 |