Chauvin Arnoux CA8333 Power Quality Analyser

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

CA8333 Qualistar Plus Power and Energy Quality Analyser (EU Version)

Designed for maintenance and test departments working in industrial or administrative buildings, the CA 8333 QualiStar Plus can be used to obtain a snapshot of the main features characterizing the quality of the electrical network. Easy to handle and compact, the QualiStar+ offers a large number of calculated values and several processing functions.

For sizing installations or troubleshooting switching faults, the CA 8333 Power Quality Analyser is equipped with a transient mode which allows users to measure the inrush current over 4 periods
The CA 8333 captures and records all the parameters, transients, alarms and waveforms simultaneously
Large colour TFT screen for easy reading
TRMS AC+ DC voltage up to 1000 V
TRMS AC+ DC current: 5 mA to 10 kA depending on the sensors
Frequency
Power values: W, VA, var, VAD, PF, DPF, cos φ, tan φ
Energy values: Wh, varh, VAh, VADh, BTU, toe, Joule
Harmonics from 0 to the 50th order, phase
Transients: up to 50
Inrush over 4 periods
Recording of a selection of parameters at the maximum sampling rate for several days to several weeks
Alarms: 4000 of 10 different types
Peak detection
Vectorial representation
Available in more than 27 languages
IP53 / IK08
USB communication
IEC 61000-4-30 Class B

Note

Current clamps are available separately.

Standards

IEC 61010 1000 V CAT III / 600 V CAT IV

Supplied with

Bag for accessories, 5 x 4 mm banana voltage leads 3 m long, 5 crocodile clips, a set of 12-colour inserts/rings for identifying the leads and inputs, a scratch-proof screen-protection film (mounted), a USB cable, a mains power cable, a mains power pack, a safety datasheet, a multi-language operating manual CD and a PC data retrieval software CD (Power Analyser Transfer).

Specifications
Attribute Value
Absolute Maximum Current Measurement 100 A ac, 100 A ac/dc, 200 A ac, 1000 A ac, 1300 A ac/dc, 10000 A ac
Number of Phases 1, 3
Maximum Voltage 1000V
Display Type TFT LCD
Measurement Type Current, Inrush Current, Voltage
Measurement Standards IEC 610101
Interface Type USB
Power Source Battery, Mains
Battery Type Rechargeable NiMH
Battery Life 13 h
Height 55mm
Width 180mm
Dimensions 240 x 180 x 55mm
Maximum Frequency 69Hz
Minimum Frequency 40 Hz
Weight 1.9kg
Length 240mm
Model Number p CA8333
1 Within 2 working day(s)
3 Within 4 working day(s) (Global stock)
Price Each
MYR 17,267.64
units
Per unit
1 +
MYR17,267.64
Related Products
The N6705C DC Power Analyzer provides unrivaled productivity ...
Description:
The N6705C DC Power Analyzer provides unrivaled productivity gains for sourcing and measuring DC voltage and current into the DUT (device under test) by integrating up to 4 advanced power supplies with DMM, Scope, Arb, and Data Logger features. The ...
HMC8015 is the first compact tester for AC/DC ...
Description:
HMC8015 is the first compact tester for AC/DC load and standby current characterisation to enable measurements without extra requirements such as computers or remote infrastructure. It features a numerical and graphical display with 26 key parameters. Its performance and compliance ...
The HM6050-2 line impedance stabilization network (LISN) is ...
Description:
The HM6050-2 line impedance stabilization network (LISN) is basically a filter network. Measurement of Line-conducted Interference within the Range from 9kHz…30MHz (CISPR 16)Selectable Transient LimiterArtificial Hand Connector A lowpass filter connects the DUT to the AC power lines.The LISN presents ...
The MPQ1000 handheld power quality analyzer has features ...
Description:
The MPQ1000 handheld power quality analyzer has features which make it ideal for troubleshooting, compliance testing and energy audits. Auto CT identification eliminates potential errors due to wrong CT range settings. The analyzer will automatically identify the CT and verify ...