Development Kit Power Management IC for use with Stepper Motor Driver

  • RS Stock No. 184-0470
  • Mfr. Part No. 410-267
  • Manufacturer Digilent
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The Pmod STEP provides a four channel drive for a stepper motor via the ST L293DD. Users may wire two pairs of channels in series to drive up to 600 mA of current per channel and can view the current status of a GPIO signal through a set of user LEDs.

Stepper motor driver for 4 and 6-pin motors
Can drive both motors simultaneously
Multiple LEDs to indicate signal propagation
Jumper for optional external power
Small PCB size for flexible designs 2.8“ ´ 1.3” (7.1 cm ´ 3.3 cm)
2´6-pin Pmod connector with GPIO interface
Follows Digilent Pmod Interface Specification Type 1

Specifications
Attribute Value
Power Management Function Stepper Motor Driver
Kit Name PmodSTEP
Temporarily out of stock - back order for despatch 15/10/2020, delivery within 4 working days from despatch date
Price Each
Was MYR76.52
MYR 71.27
units
Per unit
1 +
MYR71.27
Related Products
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control ...
Compatible Design Upgrade 3D Printers Printers, POS Office ...
Description:
Compatible Design Upgrade 3D Printers Printers, POS Office and home automation Textile, Sewing Machines CCTV, Security ATM, Cash recycler HVAC2-phase stepper motors up to 2A coil current (peak) STEP/DIR Interface with 2, 4, 8, 16 or 32 microstep pin setting ...
Position Sensorless BLDC Drivers (no Hall Sensor required)180° ...
Description:
Position Sensorless BLDC Drivers (no Hall Sensor required)180° Sinusoidal Drive for High Efficiency and Low Acoustic NoiseSupports 2V to 14V Power SuppliesSpeed Control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)Built-In Frequency Generator (FG output signal)Built-In Lock-Up ...
Supports up to 20V Output Pull-up Voltage–40°C to ...
Description:
Supports up to 20V Output Pull-up Voltage–40°C to 125°C Operating Temperature RangeSupports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive CoilsLow Output VOL of 0.4V (Typical) With– 140mA Current Sink per Channel at 5.0V Logic Input(1)– 1A Current ...