RS PRO Power Meter, Absolute Maximum Power Measurement 600kW, Absolute Maximum AC Current Measurement 600A ac

  • RS Stock No. 124-1959
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS Pro IPM242 Power Clampmeter

From RS PRO, this IPM242 clamp meter serves as a first line of defence for spot checking and verifying system conditions before deploying more specialised tools. Featuring a full range of diagnostic capabilities including phase sequence, power & power factor, total harmonics distortion & individual harmonics, inrush current and low pass filter, They are rated CAT IV 600 V, CAT III 1000 V with voltage measurement up to 1000 V ac/dc. The new innovative navigation system eliminates confusing push buttons, and replaces them with a single joystick allowing the selection of functions directly on the display.

It functions as a multimeter and analyzer with a clamp that is ideal for multifunctions including current and voltage measurements.

Battery-powered for maximum portability, and with a large backlit screen, this current clamp meter is ideal for on-the-go applications in almost any environment.

It is also supplied in a carry case to keep the clampmeter safe and secure during transit.

Features and Benefits

• 10000 Count digital display
• Active display backlight and analogue bargraph
• VoltSense (Non-contact Voltage measurement)
• True RMS reading on AC and AC+DC mode
• Auto torch-light for viewing easily while clamping conductors
• AC 600 Amp capability
• Auto AC-DC 1000 V capability and selection
• Auto Ohms/Continuity/Diode selection
• 100 kΩ resistance capability
• Continuity beeper
• Frequency counter
• Power and power factor measurement
• Total harmonics distortion and % harmonics 1 to 25
• Capacitance capability
• °C / °F temperature measurement function
• DC μA for flame rod testing
• Inrush current
• Peak HOLD
• MIN/MAX HOLD
• Smart Data HOLD
• Phase rotation indication
• Low pass filter
• Auto power off
• Safety Standard: IEC 61010-1 CAT IV 600 V / CAT. III 1000 V

Applications

This multifunction current clamp meter is designed for current measurement in electrical testing, and combines a digital multimeter with a clamping current sensor. The nature of the clamp means that it can fit around a wire at any point to sense AC and DC Current as well as inrush current. This has the advantage of allowing electricians to take a reading from a wire without touching it, which is both more convenient and safer than other methods.

They are used for measuring high levels of current in service and maintenance applications. They are also used when installing electrical equipment.

True RMS (Root Mean Square) reading has advantages over average RMS reading in that it compensates for interfering electronic loads or distorted sinewaves to give an accurate reading.

Why RS PRO?
RS PRO aims to be your go-to brand when you need reliability, quality, and affordability. We source high-quality tools and parts from trusted sources and employ expert testing to build a brand you can rely on.
When it comes to test and measurement equipment, RS PRO has an extensive range of solutions. From electrical to environmental measurement, we offer calibrated and multi-function instruments to suit your needs.

Supplied with

IPM242 power clamp meter, test leads set (1 x black & 1 x red), temperature probe, carrying case,
9 V alkaline battery (supplied and pre-installed) and instruction manual

Specifications
Attribute Value
Absolute Maximum Power Measurement 600kW
Weight 435 (with Battery)g
Absolute Maximum AC Current Measurement 600A ac
Absolute Maximum DC Current Measurement 1mA dc
Absolute Maximum DC Voltage Measurement 1000V dc
Best DC Voltage Accuracy ±0.7 % + 2 Digits
Best AC Voltage Accuracy ±1 % + 5 Digits
Best AC Current Accuracy ±1.5 % + 5 Digits
Best DC Current Accuracy ±1.7 % + 2 Digits
Maximum Power Factor Measurement +1
Minimum Power Factor Measurement -1
Power Source Battery
Battery Type 9 V Alkaline (IEC 6LF22), 9 V Alkaline (NEDA 1604A)
Dimensions 87.5 x 50.5 x 242mm
Height 242mm
Length 87.5mm
Minimum Operating Temperature 0°C
Width 50.5mm
Maximum Operating Temperature +50°C
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,272.58
units
Per unit
1 +
MYR1,272.58
Related Products
RS Pro ICM 136R clamp meter. Utilising Hall ...
Description:
RS Pro ICM 136R clamp meter. Utilising Hall Effect technology and nickel steel alloy jaws for precise measurement of ac and dc current up to 600 A. Backlit 4000 Count LCD display with analogue bargraphTrue RMS Reading on ac mode600 ...
ICM133R from the RS Pro range of clamp ...
Description:
ICM133R from the RS Pro range of clamp meters. 4000 Count digital displayBacklit, large-scale displayAnalogue bargraph 43 segmentsTrue RMS reading on AC modeAC 1000 A capabilityAC 750 V capabilityDC 1000 V capability400 Ω resistance capabilityContinuity bleeperDisplay holdPeak hold (10 Ms)Min/Max ...
RS Pro ICMA74 high performance clamp meter. 2000 ...
Description:
RS Pro ICMA74 high performance clamp meter. 2000 Count large LCD displayInnovative open jaw technology200 A (ac) measurement capability600 V dc/ac voltage measurement2000 Ω resistance rangeContinuity bleeperDisplay HOLD functionAuto power off4 mm plug in lead set allows replacement or connection ...
Digital AC and DC clamp meter with True-RMS ...
Description:
Digital AC and DC clamp meter with True-RMS reading, Dual hall sensor and a Nickel-Steel alloy jaw mechanism. True-RMS reading4000 Count digital displayAuto-rangingDual hall sensorNickel-Steel alloy jaw mechanismAC-DC 300 AAC-DC 600 V0.5% basic DC Voltage accuracy1.5% basic AC Voltage accuracy1.0% ...