Wurth Elektronik 178060302 MagI³C Power Module Step-Down Regulator for WPMDB

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

The VDRM 1710x0302 series of the MagI3C PowerModule family provide a fully integrated DC-DC powersupply including the switching regulator with integratedMOSFETs, compensation and shielded inductor in onepackage. These modules require as few as 4 externalcomponents.The 171060302 offers high efficiency and delivers up to6A of output current. It operates with an input voltagefrom 2.95 to 6V and is designed for fast transientresponse.It is available in a standard industrial high power densityQFN package (11mm x 9mm x 2.8mm) with very goodthermal performance.This module has an on-board protection circuitry to guardagainst thermal overstress and electrical damagefeaturing thermal shutdown, over-current, short-circuit,overvoltage and undervoltage protections.

Peak efficiency up to 96%
Current capability up to 6A
Input voltage range: 2.95 to 6V
Output voltage range: 0.8 to 3.6V
Continuous output power: 21.6W
Integrated shielded inductor
Low output voltage ripple: 4mV typ.
Reference accuracy over temperature: 1% max.
Adjustable switching frequency: 0.5 to 2 MHz
Current Mode control
Synchronous operation
Forced continuous mode under light load
Undervoltage lockout protection (UVLO)
Adjustable soft-start and voltage tracking
Frequency synchronization with external clock
Thermal shutdown
Short circuit protection
Cycle-by-cycle current limit
Output overvoltage protection
Output undervoltage and overvoltage Power Good
Pin compatible with 171020302 & 171040302
Operating ambient temperature up to 85°C
No derating within the operating temperature range
Operating junction temp. range: -40 to 125°C
UL94V-0 package material
Complies with EN55022 class B radiated emissions
Point-of-load DC-DC applications from 5V and 3.3V
Industrial, test & measurement, medical applications
Communication infrastructure
System power supplies
DSPs, FPGAs, MCUs and MPU supply
I/O interface power supply
High density distributed power systems

2 Layer
80 x 80 x 1.6mm

Attribute Value
Power Management Function Step-Down Regulator
Kit Classification Evaluation Board
Featured Device WPMDB
Kit Name MagI³C Power Module
Discontinued product
Related Products
The ISL8026 and ISL8026A Evaluation Boards demonstrate the ...
The ISL8026 and ISL8026A Evaluation Boards demonstrate the features of the highly efficient, synchronous step down DC-DC converters. Up to 95% efficiencyInput voltage from 2.5 V to 5.5 V 1% reference accuracy over variations in load/line/temperatureStart up with pre-biased outputInternal ...
The demoboard supports the LDO regulator NCP571 with ...
The demoboard supports the LDO regulator NCP571 with fix output voltage 1.0 V. An additional circuitry based on Single Input Buffer allows connect Enable signal with higher voltage than input voltage of LDO regulator up to 7 V. The ENABLE ...
The NCP1406 is a monolithic micropower PFM step-up ...
The NCP1406 is a monolithic micropower PFM step-up DC-DC converter. This device is designed to boost single lithium or two cells AA/AAA battery voltage up to 25 V (with internal MOSFET) output for handheld applications. Target applications include OLED Power, ...
The NCP3063 Series is a performance enhancement to ...
The NCP3063 Series is a performance enhancement to the popular MC33063 and MC34063 monolithic DC_DC converters. These devices consist of an internal temperature compensated reference, comparator, controlled duty cycle oscillator with an active current limit circuit, driver and high output ...