TDK 1.5A 20 V dc SMD RFI Filter, with Solder Pad Terminals

  • RS Stock No. 605-9042
  • Mfr. Part No. ACH3218-103
  • Manufacturer TDK
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
Product Details

3-terminal filter ACH3218

T-type EMC filter for large currents
Vertical mounting design ideal for high-density mounting

Signal/Line/Noise and Feedthrough – PCB Mount (SMT)

Unless explicitly stated, the filters in this range have an Operating Temperature Range of between -25°C and 85°C.

Specifications
Attribute Value
Maximum Current Rating 1.5A
Maximum Voltage Rating 20 V dc
Mounting Type Surface Mount
Termination Style Solder Pad
Length 3.2mm
Depth 1.8mm
Height 2.5mm
Capacitance 10nF
Dimensions 3.2 x 1.8 x 2.5mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +125°C
Resistance 60µΩ
1350 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
MYR 3.847
units
Per unit
Per Pack*
10 - 240
MYR3.847
MYR38.47
250 - 990
MYR3.576
MYR35.76
1000 - 2490
MYR3.256
MYR32.56
2500 - 4990
MYR3.02
MYR30.20
5000 +
MYR2.827
MYR28.27
*price indicative
Related Products
Two stage RFI filters which provide very high ...
Description:
Two stage RFI filters which provide very high attenuation in both common and differential mode. Designed specifically for sensitive electronic equipment and applications where interference is frequent and very intensive. A capacitor discharge resistor is included within the design.Electrical connections ...
General purpose two stage RFI filters incorporating an ...
Description:
General purpose two stage RFI filters incorporating an earth line choke. These filters are specifically designed to provide high level attenuation to unwanted interference that can occur on all three mains lines. Ideally suited for sensitive electronic equipment that may ...
Motor drive filters suitable for a wide range ...
Description:
Motor drive filters suitable for a wide range of industrial motor applicationsIHF variants offer three phase and neutral connection with low leakage current, (≤3.5mA)MDF variants offer higher performance for applications where leakage current is not a limiting factor (three phase ...
Very high insertion loss (2-stage design)Low leakage currentComplies ...
Description:
Very high insertion loss (2-stage design)Low leakage currentComplies with UL 1283, CSA 22.2 No. 8 1996Optimised for long motor cables and operation under full loadApplications include frequency converters for motor drives e.g. lifts, pumps, traction systems, conveyor systems, air conditioning ...