Asco Drain Pneumatic Valve, 1/2 in G

  • RS Stock No. 489-040
  • Mfr. Part No. CDVAE290A792
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Condensate Drain Valves

Two-way, normally closed, condensate drain valve assembly with electronic timer. Condensate Drain Valves are ideally suited to be used with compressors, are compact and lightweight, and offer adjustable on and off periods.

Timer designed for automatic control of condensate draining periods
DIN plug connection
On periods adjustable between 2 and 40 seconds
Off periods adjustable between 0.5 and 45 minutes
Protection to IP65

Note

Suitable for use with air, inert gas, water and oil.

Specifications
Attribute Value
Valve Type Drain
Default Valve Position NC
Connection 1/2 in G
Maximum Working Pressure 12 bar
Thread Size 1/2in
Thread Standard G
Temporarily out of stock - back order for despatch 27/10/2020, delivery within 4 working days from despatch date
Price Each
Was MYR1,295.07
MYR 1,281.61
units
Per unit
1 - 5
MYR1,281.61
6 +
MYR1,260.24
Related Products
The Georg Fischer PVC-U ball check valve has ...
Description:
The Georg Fischer PVC-U ball check valve has double union ends with a plain bore for solvent cement jointing. Vibration-free even at high velocityMaximum working pressure is 16barThread is 1/2in.
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). Use where a quieter fill is requiredCan be used to replace a standard bottom entry ball valveFitting instructions included.
Designed for use with aggressive fluids in corrosive ...
Description:
Designed for use with aggressive fluids in corrosive environmentsSuited to higher pressure and temperature applicationsOne piece full bore constructionOperating Temperature to +200°C’O’ rings: Viton rubber.
These nickel plated brass ball valves have seals ...
Description:
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps ...