RS PRO Automatic R 3/8 240V Pneumatic Drain Valve Brass, 123 x 96mm IP65, 0 → 16bar

  • RS Stock No. 725-125
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IE
Product Details

Automatic Drain Valve - 240V 50Hz

RS automatic drain valves are designed to provide automatic draining of filter bowls, separators, receivers and other components. The automatic drain is effective at removing condensate and contaminants. The interval time for draining or discharge can be pre-set to meet the requirements of your pneumatic installation.

Features and Benefits:

Precise self-activated control of fluids and air to a specified programme (media: air, gases, water, oil etc.)
Automatically opens for a set time to drain condensation
Length of time open (0.5 to 45 minutes) and frequency both adjustable
Discharge time 0.5 to 10 seconds
Minimal risk of internal blockages due to increased internal tolerances
LED indicator for operational status
Test facility for manual override
IP65 timer and solenoid protection, including connector
Timer/Solenoid -20 to +40 : Valve Ambient -10 to +50 : Valve Fluid -10 to +80 °C

Typical Applications:

A drain valve is an integral and one of the most important parts of the compressed air system. A condensate drain valve is responsible for removing condensate from the air system without losing excessive compressed air and without letting the system to shut down due to lack of pressure. Condensate is very harmful to air systems when not removed properly. Moisture can cause a series of problems e.g.

• washing oils and greases from production equipment, machinery and tools resulting in repairs and downtime
• inconsistent supplying of dry air causes production quality issues
• excessive rust caused by humidity within the air system can form scale in the air distribution systems

Drain Valves are used in compressed air systems where liquid, gas, or slurries need to be drained from the system.


  • We do not advise contact with corrosive material
Attribute Value
Manufacturer Series V9112
Drain Type Automatic
Inlet Port R 3/8
Outlet Port R 3/8
Supply Voltage 240V
Body Material Brass
Seal Material Nitrile Rubber
Dimensions 123 x 96mm
IP Rating IP65
Inlet Port Thread Standard R
Height 123mm
Outlet Port - Thread Size 3/8in
Maximum Operating Pressure 16 bar
Inlet Port - Thread Size 3/8in
Outlet Port - Thread Standard R
Width 96mm
Minimum Operating Pressure 0bar
45 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 933.36
Per unit
1 +
Related Products
The single station gauge isolator valve by Parker ...
The single station gauge isolator valve by Parker has been designed to prevent pressure gauge damage and extend gauge life.When installed between gauge and pressure line, it protects the pressure gauge from continuous hydraulic pressure, surges or shock loads.Operated by ...
Automatic bleed valve with float switch.Installed at the ...
Automatic bleed valve with float switch.Installed at the lowest point in a compressed air system to evacuate condensates.
A fully automatic drip leg drain for removing ...
A fully automatic drip leg drain for removing liquids from pneumatic/compressed air systems. Manufactured from zinc alloy with a transparent polycarbonate bowl. A G1/8 connection on the bottom of the bowl allows the collected liquids to be piped away and ...
Chromium plated finished brass body with 15 mm ...
Chromium plated finished brass body with 15 mm compression x 1//2 in.BSP male connections Maximum Water Temperature 120°C.Working Pressure (Non-Shock) 10bar. Lubricated long life gland packing. Glands can be removed without draining downThese valves are suitable for use with BS2871 ...