Plunger Dial Indicator, Range 0 → 12 mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
Product Details

ABSOLUTE DIGIMATIC indicator ID-C

Easy-to-read indicator with full-size digits.
GO/NG tolerance display.
Unlimited response speed eliminates spindle over-speed errors.
Functions: power ON/OFF, ZERO/ABS switching, data output, tolerance limit setting, PRESET, counting direction switching.
Resolution: 0.001mm/0.01mm
Accuracy: 0.003 mm.
Measuring force less than 1.5 N.

Specifications
Attribute Value
Maximum Measurement 12mm
Accuracy ±0.003 mm
Resolution 0.01 mm
SPC Data Output Yes
Zero Resettable Yes
Measurement Range 0 → 12 mm
Imperial or Metric Metric
Battery Operated Yes
3 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,999.40
units
Per unit
1 +
MYR1,999.40
Related Products
The Mitutoyo 513 series horizontal lever indicator has ...
Description:
The Mitutoyo 513 series horizontal lever indicator has a dial reading of 0-70-0 and a maximum resolution of 0.001mm. It is professional, non-magnetic type measuring instrument that can reach places conventional indicators cannot. The non-magnetic pointer and contact point permit ...
Vertical or horizontal position Dial rotates 90° either ...
Description:
Vertical or horizontal position Dial rotates 90° either side of vertical positionLCD display with large 12.5mm digitsTravel: 12.5mm / 0.5in Repeatability: 0.01mm / 0.0005in3 button operation: ON/OFF, Metric/Inch conversion, Zero resetMeasuring speed: 1.5m/sFitted with Lug Back Ball anvil measuring tip ...
Dial rotates 360 degrees5 button operation Inch/metric conversion; ...
Description:
Dial rotates 360 degrees5 button operation Inch/metric conversion; ABS/set; Zero/ONTolerance/directionRan. Run-Out mode Value Change: 0.003mm / 0.00012inDigital fan for run-out viewingMax speed: 0.6m/sMeasuring force: 1.5NCentre lug back8mm stem with anvil thread M2.5DIN 878Power: 1 x 3V CR2032 Lithium Battery.
Meets ISO R463/J15 7503 standards.All indicators can be ...
Description:
Meets ISO R463/J15 7503 standards.All indicators can be lug or 8mm stem mounted.SPC port Continually transmits data (Mitutoyo format), 1m/2m leads available seperately, see this section.